AEOLOS – H 30kw Horizontal Axis Wind Turbine

The 30kW Aeolos-H 30kw

High Performance – Horizontal Axis Wind Turbine System

With a three-phase permanent magnet generator – gearless and automatic electronic and secondary hydraulic brake system.

Aeolos-H 30kw Horizontal Axis Wind Turbine – On-Grid Wind Turbine System

Aeolos-H 30kw – Permanent Magnet & Gearless Wind Turbine System!

50hz or 60hz ON-Grid System – 18m Free Standing Tower version

Only $73,790.00 – plus shipping

For 24m Free Standing Tower, add $5,180.00

This amazing gearless, Permanent Magnet Wind Turbine is specially designed for low and medium wind speeds and applies the latest design in wind turbine technology.

The direct drive, permanent magnet design guarantees reliable performance, efficiency, convenient transport easy installation, and most importantly, very low maintenance.

With Aeolos’ patented three-phase permanent magnet direct drive generators, and no gearbox or booster device, these wind turbines have a characteristic of safety, reliability, and long period life.  The low-speed generator of Aeolos-H 30kw reduces noise, and increases wind energy utilization effectively, and compared with the power output of other wind turbines, it has a higher wind energy utilization and annual electricity production. Aeolos wind turbines are powering hundreds of countries and regions like the United Kingdom, Italy, Denmark, Brazil, and France to list a few.

 

The Aeolos-H 30kw wind turbine is divided into off-grid and grid-connected types, which is designed for large-scale farms, villages, schools, hospitals, small industrial enterprises, production and processing enterprises, and small-scale wind farm. It could produce annual 100,000 – 180, 000kwh in the average wind speed locations which meets more than 70% of electricity consumption requirements of small groups and also provide low-cost, non-polluting clean energy.

The Aeolos-H 30kW wind turbine’s configuration uses an innovative direct drive design (no gearbox) in conjunction with a permanent magnet generator with the end result being significantly increased reliability for the system as a whole. This type of setup reduces the overall weight in the nacelle and requires a generator speed that is significantly lower than that for a doubly fed inductor generator designs using old-fashioned gearboxes which usually need bearing changes after 5 years of operation. All of this means that the Aeolos-H 30kw turbine power train is more reliable, has fewer moving parts to go wrong, and requires much less maintenance than conventional gearbox-equipped turbines.

The result of the direct drive-permanent magnet technology is a system that significantly increases reliability and reduces maintenance costs. Reduced downtime for maintenance also means less non-producing time offline. The elimination of associated mechanical losses that are inevitable with gearboxes also leads to improved efficiencies in the power conversion process.

The Aeolos-H 30kw generator itself is also much more robust than conventional systems and gives greater efficiencies when wind speeds are not at the full rating, compared to the earlier conventional designs.

The Aeolos-H 30kw can be installed as a single unit on- or off-grid wind turbine system or combined as multi-units building an on-grid independent wind farm connection.

The Aeolos-H 30kw wind turbine – with a tower height of 18m or 24m guarantees excellent yields in the 30kW category at inland sites.

With the cut in wind speed as low as 3m/s, the direct drive technology enables the turbine to make efficient use of the prevailing wind conditions at the respective sites to produce sufficient electrical energy. This machine is most suitable to supply electricity for factories, feed the local grid, low-cost up- scaling, and addition to existing wind farms and on-shore projects.

The Aeolos-H 30kw has maximum operation efficiency without increasing operating loads in the full and partial load ranges and at the same time prevents undesirable output peaks thus guaranteeing excellent yield and high quality of power fed into the grid. This turbine is a flagship of the latest wind turbine precision technology using rigid and high-quality components.

5-year Warranty on all parts

10 years extended warranty available on request.

The complete System includes:

• Generator
• Hub
• Nacelle
• Tower
• Blades
• On-Grid Controller
• On-Grid Inverter
• Remote Monitoring & Control via Internet (optional)

Full CE Certification

• Price CIF (including shipping & insurance) to any seaport on request
• Delivery lead times is only 45 days after receipt of payment 50% in advance and 50% before shipment – See Terms & Conditions

TECHNICAL SPECIFICATION:

Aeolos-H 30kw Horizontal Axis Wind Turbine – On-Grid

System

Type: Grid Connected
Configuration: Horizontal Axis
Rotor Diameter: 12.5m

Tower
Type: Free stand, monopole
Height: 18m (Standard) – 24m optional

Performance

• Rated power – 30kw

• Start wind speed – 3 m/s

• Cut-in wind speed – 3 m/s (6.7 mph)

• Cut-out wind speed – 25 m/s (55.9 mph)

• Survival wind speed – 45 m/s (100.7 mph)

• Design lifetime – 30 years

• Overall weight – 180 kg (3042.3 lbs)

• Rotor diameter – 12.5m (41 ft)

• Swept area – 122.6m² (1319.6 ft²)

• Rotor speed – 100 rpm

• Blade material – Glass fiber

• Frequency – 50 Hz or 60 Hz

• Voltage – 320- 480V

• Type – Three-phase permanent magnetic generator

• Generator efficiency – >0.85

• Main brake system – Automatic electronic brake system

• Secondary safety – Hydraulic brake system

Example of a Wind Farm Field Construction Design for the Aeolos-H 30kW – Direct Drive, Permanent Magnet Wind Turbine System – On-Grid

Sweep Area – Aeolos H 30kW wind turbine 122.6 m*2

• MyWindPowerSystem can assist in arranging the installation of the turbine/s and adjustment setup through one of our affiliated specialists