The 225kW Zeus 225/40 High-Performance Wind Turbine System
This amazing Wind Turbine manufactured by Vitaa Zeus Energy is specially designed for low and medium wind speeds. The Zeus 225/40 wind turbine – with tower versions of 28,7 meters and 48.7m hub height – guarantees excellent yields in the 225kW category at inland sites. Its 29.8m rotor diameter and 48.7m hub heights enable the turbine to make efficient use of the prevailing wind conditions at the respective sites to produce sufficient electrical energy. This machine is most suitable to supply electricity for factories, feed the local grid, low-cost up- scaling, and addition to existing wind farms and on-shore projects.
50hz ON-Grid System – 28,7m Tower version – incl. shipping to any European seaport
Only $335,000.00
This amazing Wind Turbine manufactured by Vitaa Zeus Energy is specially designed for low and medium wind speeds. The Zeus 225/40 wind turbine – with tower versions of 28,7 meters and 48.7m hub height – guarantees excellent yields in the 225kW category at inland sites. Its 29.8m rotor diameter and 48.7m hub heights enable the turbine to make efficient use of the prevailing wind conditions at the respective sites to produce sufficient electrical energy. This machine is most suitable to supply electricity for factories, feed the local grid, low-cost up- scaling and addition to existing wind farms and on-shore projects.
The Zeus 225kW has maximum operation efficiency without increasing operating loads in the full and partial load ranges and at the same time prevents undesirable output peaks thus guaranteeing excellent yield and a high quality of power fed into the grid. This turbine is a flagship of precision using only high quality components from western European manufacturers such as Flender gearbox, ABB generator and all bearings by SKF. The Zeus 225kW is assembled in Indiaand is an exact and licensed copy of the original NegMiconM700 turbine. There are over 3000 turbines in operation worldwide.
1 year Warranty on all parts, 2 years optional!
The complete System includes:
- Generator
- Gearbox
- Hub
- Nacelle
- Tower
- Blades
- Yawing System
- Hydraulics
- Break system
- Price CIF to any seaport in Europe:
- Incl. 2 years warranty on all parts
- Delivery lead times is 3 months incl. shipping to Europe – See Terms & Conditions
50hz ON-Grid System – 28,7m Tower version – incl. shipping to any European seaport
Only $335,000.00
50hz ON-Grid System – 48,7m Tower version – incl. shipping to any European seaport
$354,000.00
Terms & Conditions: Click here
We can also deliver the Zeus 225kW as a 60Hz version for operation in the US or other 60hz grid frequency countries
60hz ON-Grid System – 28,7m Tower version – excl. shipping. Shipping quotes on request.
$339,500.00
60hz ON-Grid System – 48,7m Tower version – excl. shipping. Shipping quotes on request.
$360,250.00
TECHNICAL SPECIFICATION:
Cut in wind speed | Approx. 4m/s |
Cut out Wind speed | Approx. 25m/s |
Rated wind speed | 15m/s |
Survival Wind speed | 60m/s at 2 sec gust |
Tip Speed | 58/39 m/s |
Rotor Revolutions | 37.5/25 rpm |
Hub height (optional) | 31m/48m |
Nacelle tilt angle | 5 Degrees |
Regulation | Stall |
GEARBOX
Gear Box | Flender/Kirloskar |
Type | Helical |
Gear Ratio | 01:40 |
No. of steps | 2 |
GENERATOR
Generator | ABB |
Rated Power Output | 225/40 KW |
Type | Asynchronous |
Voltage | 3phase |
Revolutions | 400V |
Frequencies | 1500/1000 rpm – 50Hz |
NOTE: Generator also available as 60hz version
TOWER
Type | Tubular |
Height (Optional) | 28.7/48.7 m |
Material | Steel plate |
Sections | 4 |
Ladder | Inside the tower |
Nacelle frame | Hot Sprayed galvanized – welded steel plate frame |
BRAKE & YAW SYSTEM
Aerodynamics | Leading tip spoiler |
Mechanical | Failsafe disc brake |
Yaw System | Sewing system with – Gear motors yawing – |
Example of a Wind Farm Field Construction Design for the Zeus 225kW
- The required set floor space for 1 unit with a 29.6m rotor diameter is: 1639 m2
- A 2.25MW wind farm would require 10 sets of 225kW wind turbines
- MyWindPowerSystem can assist in arranging the installation of the turbine
MyWindPowerSystem.com and the MyWindPowerSystem logo are trademarks of MyWindPowersystem.com in the US and other countries
Time wasters and tire kicker inquiries will not be accommodated!
For more information please contact us