1.5mW Quindo FDMG1.5 Industrial Wind Turbine System

Submitted on: 23 Jan 10

Website Address: http://www.mywindpowersystem.com/products/2010/01/1-5mw-quindo-fdmg1-5-industrial-wind-turbine-system

Category: $ 1,998,500.00, 150KW+ Industrial Wind Turbines

Website Rating:

(No Ratings Yet)

Loading ...

Description:

Quindo FDMG1.5 – High Performance 1.5mW Wind Turbine System from

Quindo FDMG1.5 – 1.5mW Wind Turbine

Quindo FDMG1.5 Wind Turbine System !

This amazing Wind Turbine manufactured by Foshan Quad is specially designed for low and medium wind speeds. The FDMG1.5 wind turbine – with a new rotor blade design and tower version of 65m hub height – guarantees excellent yields in the 1.5 mW category, even at inland sites. Its 70.5m rotor diameter and 65m hub heights enable the turbine to make efficient use of the prevailing wind conditions at the respective sites to produce sufficient electrical energy. This machine is most suitable to supply electricity for factories, feed the local grid, low cost up- scaling and addition to existing wind farms, on-shore and off-shore projects.

The turbine is output controlled by variable speed and allows the FDMG1.5 to attain maximum operation efficiency without increasing operating loads in the full and partial load ranges and at the same time prevents undesirable output peaks thus guaranteeing excellent yield and a high quality of power fed into the grid. This turbine is a flagship of precision and advanced Chinese engineering. 5 years Warranty on all parts!

Complete System includes:

Generator
Gearbox
Hub
Nacelle
Tower
Blades
Pitch Controller
Yawing System
Hydraulics
Break system

Price FOB: Foshan – China

Incl 5 years warranty on all parts

Delivery lead times is 4 month – See Terms & Conditions

OFF-Grid System

$1,698,500.00

Click on prices to convert to your currency!

Terms & Conditions: Click here

Optional Grid-Tie Inverter:

To include Grid-tie Inverter System add

$300,100.00

Technical Specification Quindo FDMG1.5 Wind Turbine System:

Rated power 1.5MW
Power control Variable speed and Pitch adjusted
Rated wind speed 12m/s
Cut-in wind speed 3.5m/s
Cut-out wind speed 25m/s
security rank IEC II A
Designed lifespan 20years
Environment temperature -30℃ ~ +41℃

ROTOR

Number of blades 3pcs
Rotor diameter 70.5m
Hub apex height 65.1m
Rpm of rotor 12-20rpm
Sweep area 3904

BLADES

Blades length 34m
Blade model DU-FFA-DU
Material GFR-Glass-fiber Reinforced Resin
Weight 4450KG

PITCH CONTROL

Working way electromotor pitch adjust, independently blades adjust
Pitch –controlled 4-points double row angular contact ball slewing ring with inner ring gear bearing
Pitch adjusted rate 7.5 /s-12.5 /s
Pitch adjusted angle range -94
Battery lead acid, 250-300VDC
Slip ring 29 rows

GEARBOX

Type One stage planet gear/two stage parallel axis cylindrical inclined gear
Inclined angle of main axis 5
Ratio 0.104166667
Oiling mixed lubrication

MECHANICAL BRAKE

Position high speed axis
Working way passive brake, spring locked, press and operate the brake

YAWNING SYSTEM

Working way Drive motors active yawing
No. of motors 4 units
Yawing axis double row external gear 4 points contact ball bearing
Yawing brake motor brake sticking, 6 hydraulic brake clips

GENERATOR

Type Doubly-fed asynchronous wound generator
Rotational speed 1000~1800rpm
Rated voltage 690V
Frequency 50Hz
Seal rank IP54
Cooling forced air cooling
Converter rotor-side converter, PWM Modulation IGBT

COUPLING

Model KTR RADEX-N
Max. deviation of alignment 1.5
Dynamic balance rank 6.3

TOWER

Type 3 sections tapered tubular steel tower
Height 63m
Max. diameter 4260mm

CONTROL SYSTEM

Core processor ARM embedded system WP4000
Communication Industry bus line CAN Open
Components cabinet in generator case, cabinet under tower, power switch cabinet

WEIGHT

Turbine weight 30 Tons
Generator case 50 Tons
Tower weight 93.6 Tons
Total weight 173.6 Tons

SECURITY SYSTEM

Full wind span electromotor pitch adjust aerodynamic brake;
Mechanical high speed axis associated brake;
Equipotential lighting protection system;
Manual yawing function

Power Curve

Internal Structure

Nacelle Series

Nacelle Body

Gear Box

Pitch Control – Yaw Control – Brake & Cooling System

Manufacturing & Test Assembly

Blades Finish

Example of a Wind Farm Field Construction Design for the FDMG1.5

Sweep Area - 1.5 MW wind turbine/set floor space: 3904 m2

The required set floor space for one unit of the FDMG1.5 MW wind turbine with 70.5m rotor diameter is: 3904 m2
A 50MW wind farm would require 33 sets of 1.5MW wind turbine with a total required floor space of 1,912,480 m2
MyWindPowerSystem can assist in arranging installation of the turbine and adjustment set up
Typical charge (subject to location)

$73,600.00