Enercon E82 2MW Wind Turbine from Enercon GmbH – Windkraftanlage – Product Review
Submitted on: 12 Nov 09
Website Address: http://www.mywindpowersystem.com/products/2009/11/enercon-e82-2mw-wind-turbine-from-enercon-gmbh-windkraftanlage
Category: 150KW+ Industrial Wind Turbines
Website Rating:
Description:
Enercon E82 2MW Wind Turbine System from Enercon GmbH – Product Review
Enercon E82 – 2MW Wind Turbine
Enercon E82 2MW Wind Turbine System !
This amazing Wind Turbine is specially designed for medium wind speeds, the ENERCON E-82 wind turbine – with the new rotor blade design and tower versions up to 108m hub height – guarantees excellent yields in the 2 MW category, even at inland sites. The E-82 is a wind energy converter with a three bladed rotor, active pitch controls, variable operating speed and a rated power of 2000 kW. Its 82 m rotor diameter and 78 – 108 m hub heights enable the turbine to make efficient use of the prevailing wind conditions at the respective sites to produce electrical energy.
Output controlled by variable speed allows the E-82 to attain maximum operation efficiency without increasing operating loads in the full and partial load ranges and at the same time prevents undesirable output peaks thus guaranteeing excellent yield and a high quality of power fed into the grid. This turbine is a flagship of precision and advanced german engineering.
Technical Specification:
General data
- Surface : 5281 m²
- Power density : 2.6 m²/kW
- Wings number : 3
- Power control : Pitch
Rotor
- Min rotation speed : 6 rounds/minute
- Max rotation speed : 19.5 rounds/minute
- Min wind speed : 2 m/s
- Nominal wind speed : 13 m/s
- Max wind speed : 34 m/s
- Manufacturer : Enercon
Gear box
- Speed number : -
- Ratio : -
- Manufacturer : -
Generator
- Type : Sync. – Wound rotor
- Number : 1
- Max speed : 19.5 rounds/minute
- Output voltage : 400
- Manufacturer : Enercon
Tower
- Min hub height : 78 m
- Max hub height : 138 m
- Manufacturer : SAM, WEC Turmbau
[ad]


(8 votes, average: 4.50 out of 5)

(4.00 out of 5)



Hello, We would be interested i purchasing 17 Enercons. What is your price? What is delivery time??
Please quote price for this type turbine for export to Pakistan.
Thanks
Could you please send me more technical info.
BR
Indrek Kaskpeit
Could you please tell me what your price for the Enercon E82 – 2MW Wind Turbine is? Do you also have used/refurbished wind turbines. I am only interested in outputs 600kW and greater.
Thank You
Konrad
Hi, could you please tell me the rough price of three 9ookw or 3 2mw turbines delivered to scotland?
We M/s.Venus Home Appliances (P) Ltd., as the manufacturer of Domestic Water Heaters. We are interested in procurement of a 2MW Windmind. Kindly quote your lowest price for your nearest FOB port.
Hello, Looking for 10mw of refurbished equipment sent to Canada, Need some Info
could you please tell me the price per unit for the Enercon E82 -2MW wind turbine . what will be the cost of transportation ,installation and comissioning per unit for 30 -50 unit in middle east .
Thanks .
could you please tell me the price per unit for the Enercon E82 -2MW wind turbine . what will be the cost of transportation ,installation and commissioning per unit for 2-3 unit in Syria.and can we paid for it throw 3-4 years with banking assurance.
Thanks .
Enercon does NOT sell through distributors, only directly.
E-82 are close to 2 million Euro and they normally control transportation and installation. Add foundation and grid connections About 3 million Euro for a completed one.
What would be the cost of 24 2 MW wind turbines, including transportation, installation & startup in turkey….. ballpark cost..please
Dear Sir.
You listed 31 Enercon E-30’s for sale, are they still available?
Please mail me some info. I gather they were taken down in Oberdoria located in central Germany.
I had one e-mail from you where you wrote an answer would be coming.
Thank you very much.
Sincerely, Erling Olsen.
Could you please tell me the price per unit for the Enercon E82 -2MW wind turbine?
What will be the cost of transportation and installation per unit in Russia(the Republic of Karelia)?
Thank you.
Enercon E82 2MW
Request for price and delivery time, Serious.
Thanks
Looking for cost and possible corprate sponsorship incentives for the Arbor Day Foundation. Would be a functional mill with an educational center and viewing station. Located in Nebraska, United States.
Thank You
Need a price on 5000 E82 2MW including shiping without installation. This is backed by the World Bank and serious.
I wish to purchase one of your turbine of this kind. please quote me the amount and provide me the brochure of your product.
Please advise offer and sale terms (both FOB and CIF at Thailand). As well, please advise listing of equipment and any third-party, independent survey of the equipment, as well as any other details/specifications of the equipment.
Have interest in purchasing.
Thank you.
Hi.
I am looking for 2 complet units wind energy(300KW 50HZ).
Could you please give me the FOB price for new and used units with all informations.
If I need you to fit it in very save place in IRAQ,can you do it or not and how much it cost me.
Looking forward to hear from you
Regards
To whom it may concern,
Dear sirs,
May we introduce ourself to you , our company is: LMS power drive systems co., ltd. in Thailand.
We are interesting about the wind power generating set but we got the problem about unstable of the wind speed
in a year which has half of a year is very low wind speed and some months is higher but it is not much higer
as shown below details:-
From Dec-Jan-Feb wind speed approx 8.0-11.9 m/s at elevation 50m.
Mar ” ” ” 7.5-8.5 m/s ” ” 50m.
April ” ” ” 5.0-6.0 m/s ” ” 50m.
May-Jun-Jul,Aug-Sept-Oct ” ” ” 2.0-4.0 m/s ” ” 50m.
Nov ” ” ” 6.5-7.5 m/s ” ” 50m.
Pls advise :-
Our intention to install one set of wind power generating set for a trial set cap. approx 2MW, 400V, 50HZ.
1. What is most suitable type for above mentioned wind speed details? ( It was classified to be low or medium wind speed type or not)
(Pls recommend, the type of wind power generating set which can cover the full rated output 2MW of the 12 months from Jan-Dec)
2. what is hub height?
3. What is cut-in and cut-out speed with rotor and others speed?
4. What is power curve of speed efficiency with surface or swept area with power density?
5. Others full specs which is covered our requirements.
We are appreciated for your advice.
rgds/sanga