• 6 units available in Q2′2010

• 5 units in Q3′2010
  

All 11 units in top condition

5 units are build in 2003 – still in operation in Germany and can be viewed while operating – all of these 5 units have new gearboxes

$2.3m USD per unit -Transformers included – dismantled and loaded onto truck

6 units from 2003/2004 –

$1.625m USD per unit – not dismantled yet – Transformers included, price includes also dismantling and loading onto truck.

48m/60m Towers

TECHNICAL DATA:

Wind Turbine type: V80-2.0MW
Controller type: VMP- 1.75/2.0MW
Voltage: 3×690 V +10/-10%
Voltage: 3×480 V +10/-10%
Frequency: 50 Hz +1/-3 Hz
Current 690V: 1600A
Current 480V: 240A
Max. short circuit current 690V: IK = 23kA
Max. short circuit current 480V: IK = 36kA

1. Rotor

Manufacturer: Vestas
Type no.: VESTAS 39 m
Material: Glass fibre reinforced epoxy (blade shells)
Overall length: 39 m
Max. Chord: 3357 mm
Weight: 6500 kg

Pitch System
2.1 Hydraulic Cylinder
Manufacturer: LJM

Gearbox Oil System
5.1 Electrical Pump
Manufacturer: Settima

Hansen Transmissions.

Yaw Gear
Before 01.10.01
Manufacturer: Bonfiglioli/Transmittal SOM

Electric motor spec.: 2.2 kW/6 pole/690 V
Weight: 190 kg

Note: subject to technical alterations, errors and omissions

Contact add owner for more details!

Please note! Images for illustration purposes only

DOWNLOAD TECHNICAL DATA SHEETS:

Vestas v80 technical data

Vestas V80 electrical data V80

Vestas specific dataV80

Related tags:

*  vestas celtic

* vestas v 90

* vestas v100

* vestas v66

* vestas turbines

* vestas v47

* vestas v82

* vestas” turbine

* vestas windmill

* vestas v27

* vestas v52

* vestas offshore

* vestas v112

* vestas wind power

* vestas blades

* vestas wind turbines

* vestas v90

* vestas wind turbine

Offers in the region of $750,000 per unit / dismantled and loaded onto truck

With more than 5,000 units in operation worldwide, GE’s 1.5 MW turbine continues to be one of the world’s most widely used wind turbines in its class.

Source: http://www.gepower.com

There are 4 complete units with 63m Towers available in Q2′2010

* Year of build: 2003
* All in good condition and currently still in operation in Europe.

Please note! Images for illustration purposes only

Operating Limits (outside temperature)

* Cold weather light: -4 to 104 °F (-20 to 40 °C)
* Cold weather extreme: -22 to 104 °F (-30 to 40 °C)/-40 °C to +50 °C survival without operation

Control System

* Programmable logic controller (PLC)
* Remote control and monitoring system

Gearbox

* Three-step planetary spur gear system

Generator

* Doubly-fed three-phase asynchronous generator

Braking System (fail-safe)

* Electromechanical pitch control for each blade (three self-contained systems)
* Hydraulic parking brake

Yaw System

* Electromechanical driven with wind direction sensor and automatic cable unwind

Converter

* Pulse-width modulated IGBT frequency converter

Tower design

* Multi-coated, conical tubular steel tower with safety ladder to the nacelle
* Load lifting system, load-bearing capacity more than 441 lbs (200 kg)
* Service platform for 100 m hub height (service lift optional)

Noise Reduction

* Impact noise insulation of the gearbox and generator
* Sound reduced gearbox
* Noise reduced nacelle
* Rotor blades with minimized noise level

Lightning Protection System

* Lightning receptors installed on blade tips
* Surge protection in electrical components

Note: subject to technical alterations, errors and omissions

See Technical Specs on GE Energy’s website here:

http://www.gepower.com/prod_serv/products/wind_turbines/en/15mw/specs.htm

With more than 5,000 units in operation worldwide, GE’s 1.5 MW turbine continues to be one of the world’s most widely used wind turbines in its class.

Contact add owner for more details!

Please note! Images for illustration purposes only

Related tags:

GE 1.5 MegaWatt,
GE 1.5 SLE,
GE 1.5MW,
GE 1.5 MW,
GE 1.5 Wind Turbines,
GE 1.5s,
GE 1.5 sl

This used wind turbine for sale is from 1983 and has only produced 5830kWh. Currently installed in Minnesota – USA and grid-tied. This machine was made for 110V AC utility connected. The turbine was not a very well sited installation. It comes with a 60′ Rohn SSV lattice tower which is in very good condition.

Technical Specification:

Make: Enertech Corporation
Model: Thunderbird 4000
Blades: 3
Diameter: 17.9ft
Volts: 220AC
Cut in speed: 8mph
Rated output: 4kW
Max. O/P: 4.7kW
Speed: Stall

The System comes with Grid-Tie controllers. Blades in need of replacing – otherwise parts are complete with exception of 1 tip brake – all original.

Turbine can be broken down to into 3 x 20′ sections or further if necessary -

Dismantling to be arranged by buyer. Price including dismantling and loaded onto truck, please add $1,200.00

18 NedWind Second Hand Wind Turbines For Sale (Made in Holland) 500 kW per unit at $50,000 only. – Dismantled and FAS sea port Netherland Antilles. The Turbines are still in operation and can be viewed generating eletricity.

Perfect for investors from Europe, South America or Netherlands Antilles

• Turbine type: NedWind 46
• Nominal Output: 500 kW
• Rotor diameter: 46.1meter
• Hub height:47.2 meter
• Number of turbines available: 18  (eighteen)
• Total combined capacity: 9 MW
• First commissioning date: December 2000

Price of $50,000 p.u. is dismantled and delivered – FAS - Curacao (Netherlands Antilles) and can ship anywhere in the world

Perfect for investors from Europe, South America or Netherlands Antilless because of low shipping costs from the Netherlands Antilles

Currently installed and in operation in Curacao (Netherlands Antilles near north of South America) – Dismantling start March/April 2010 due to re-powering and upgrading current site to 3mW machines. Turbines can be inspected in operation until dismantling starts. Owner is happy to let turbines in operation as close to dismantling date as possible so that a potential buyer can view the machines in operation.

Extensive list of spare parts come with the machines!!!!

Full service history for each turbine. Available on request if LOI received.

Each wind turbine has it’s own step-up transformer (690 V/12 kV), also located on the tower foundation. The wind generators have a nominal generating voltage of 690V at a frequency of 50 Hz. Each generator is connected to an internal 12 kV grid. The generators produce 690 V, which is transformed up to a 12 kV for internal transport between generator to export point. At export point the 12 kV is again transformed up to 30 kV voltage in order to be transported via a 30 kV-cable over a 7 kilometers distance from the wind farm into a substation. The step-up 12kV/30kV transformer is located in the middle of the farm, between turbines number nine and ten.

Please contact ad owner for more details

9 x Micon M530, in good condition – full service history – only $70,700 p.u. – still in operation in Denmark

Start your own windfarm with  9 x Micon M530 Wind Turbines!

Generate a staggering total combined power output of 2.25mW with these 9 units of Micon M530 for only $70,700 each - total only $636,300

9 Units Available Spring 2010 !

ONLY $70,700 per turbine!
Can be viewed and inspected while in operation!

We can assist in providing installation service at your site as well as after care service and maintenance!

Nominal Effect 250KW
Year of build: 1993
30 m hub height
26 m rotor diameter
Voltage/Grid Frequency 400V/50Hz

9 x Used Micon M530 Wind Turbines – 250KW For Sale – a massive 2.25mW combined power output

Technical Specification:
2 Micon M530, very great condition – full service history – still in operation in Denmark

Only $52,000 per unit, dismantled and loaded onto truck.

Nominal Effect 250KW
Year of build: 1990
30 m hub height
26 m rotor diameter
Voltage/Grid Frequency 400V/50Hz

DOWNLOAD TECHNICAL SPECS SHEET pdf

Micon-M530 Technical Specification Sheets

Please contact MyWindPowerSystem.com for quick sale – These will be shifted fast!!!

30 discounted units of brand new General Electric GE Wind Turbines – GE 2.5MW Wind Turbines For Sale! - 10 units are Excluding Towers and 20 units Excluding Towers and Blades.

Picture for illustration only

Great opportunity for the serious wind energy investor or Wind Farm developer who is looking for immediately available large industrial 2.5MW wind turbines.

30 brand new units of the magnificent GENERAL ELECTRIC GE 2.5MW immediately available. These Wind Turbines had been shipped to Asia in 2008 and are currently in storage at the original destination port in Asia. All 30 units are still readily packaged and can be shipped world wide immediately. The turbines have never been in operation and 10 units come without towers and 20 units without towers and blades -  Incoterm FAS Japan Seaport

• Price for 10 units without towers on request – Tower specs and drawings available to obtain quotes from 3rd party tower manufacturers
  
• Price for 20 units without towers and without blades on request – Blades are available from GE directly

Picture for illustration only

POWER
Rated power 2,500 kW
Rated wind speed 12.0 m/s
Cut-in wind speed 3.5 m/s
Cut-out wind speed 25.0 m/s
ROTOR
Diameter 100.0 m
Swept area 7,853.98 m2
Number of blades 3
Rotor speed 14.1 rpm (rated power) rpm
Type LM 487
Material glas-fibre reinforced plastic

NACELLE
Design separated
GEAR BOX
Type combined spur / planetary gear
Stages 3
Ratio 1:117.4

GENERATOR
Type synchronous, permanent magnet
Number 1
Speed 1,650 rpm (rated speed) rpm
Voltage 690 V V
Grid connection via converter
Grid frequency 50 / 60 Hz

CONTROL AND PROTECTION SYSTEM
Power limitation pitch
Speed control variable via microprocessor
Main brake individual blade pitch control
Second brake system disk brake
Yaw control system 4 electric gear motor(s)

GE 2_5mW wind turbine Blades in storage

GE 2_5mw wind turbine hub in storage

GE 2_5mw wind turbine Nacelles in storage

For further details, please contact add owner

Currently Located in New York State – USA – World wide shipping available.

With more than 5,000 units in operation worldwide, GE’s 1.5 MW turbine continues to be one of the world’s most widely used wind turbines in its class.

Source: http://www.gepower.com

There are 12 complete units with 80m Towers available immediately.

* The oldest are from 2006 and the newest are from 2009.
* All in top quality and properly stored
* None of the 12 machines have operated yet.
* All new, still with warranty.

Please note! Images for illustration purposes only

GE Energy commissioning required to validate warranty – Extended warranty also available

Operating Limits (outside temperature)

* Cold weather light: -4 to 104 °F (-20 to 40 °C)
* Cold weather extreme: -22 to 104 °F (-30 to 40 °C)/-40 °C to +50 °C survival without operation

Control System

* Programmable logic controller (PLC)
* Remote control and monitoring system

Gearbox

* Three-step planetary spur gear system

Generator

* Doubly-fed three-phase asynchronous generator

Braking System (fail-safe)

* Electromechanical pitch control for each blade (three self-contained systems)
* Hydraulic parking brake

Yaw System

* Electromechanical driven with wind direction sensor and automatic cable unwind

Converter

* Pulse-width modulated IGBT frequency converter

Tower design

* Multi-coated, conical tubular steel tower with safety ladder to the nacelle
* Load lifting system, load-bearing capacity more than 441 lbs (200 kg)
* Service platform for 100 m hub height (service lift optional)

Noise Reduction

* Impact noise insulation of the gearbox and generator
* Sound reduced gearbox
* Noise reduced nacelle
* Rotor blades with minimized noise level

Lightning Protection System

* Lightning receptors installed on blade tips
* Surge protection in electrical components

Note: subject to technical alterations, errors and omissions

See Technical Specs on GE Energy’s website here:

http://www.gepower.com/prod_serv/products/wind_turbines/en/15mw/specs.htm

With more than 5,000 units in operation worldwide, GE’s 1.5 MW turbine continues to be one of the world’s most widely used wind turbines in its class.

Contact add owner for more details!

Please note! Images for illustration purposes only

Related tags:

GE 1.5 MegaWatt,
GE 1.5 SLE,
GE 1.5MW,
GE 1.5 MW,
GE 1.5 Wind Turbines,
GE 1.5s,
GE 1.5 sl

Are you planning to repower?

Want to sell your exisiting wind turbines?

Want to achieve the best sales price?

Are you searching for a used wind turbine?

Then contact MyWindPowerSystem.com – Your No. 1 online broker for used and refurbished second hand wind turbines

‘Ready to Buy’ clients waiting for:

Vestas – NEG Micon – NordTank – Bonus – Tacke – WindMaster – GE – Enercon – Lagerway – Gamesa – Acconia – Suzlon – WindMatic etc.

All turbine sizes considered – From 2kW – 6mW

From single units to complete wind park sales!

Flexible sales commssion rates available!

Our premium Service includes:

SELLERS

• Achieving the highest possible sales price for your used turbines
• Preparation of brief details for mail shot and internet postings describing the turbine for sale to assist in finding a buyer
• Advertise and promote your turbines for sale through our dedicated Used Wind Turbines Market Place website and if required, prepare and post feature articles on our front homepage placed in the top banner area currently attracting 30k+ unique visitors pcm – trending up
• Conduct mail shot promotions to suitable prospects from our world wide register of ‘ready to buy’ clients currently looking to purchase turbines for small to large wind farm projects in the range of 500KW up to 100MW+
• Following a prospective buyer making an offer, we will take up references (if not registered with us) and assess their ability to complete a purchase
• Arrange for prospective world wide buyers to visit and view the turbines on site.
• Proactively drive communications and negotiations between seller and prospective buyers until close of deal

BUYERS

• Achieve the best possible purchase price for a used turbine
• Registered buyers are served with a premium ‘automated notification’ service informing the same of newly available turbines within hours of going to market
• Preparation of brief details for mail shot and internet postings describing the required turbine wanted to assist in finding a seller
• Advertise and promote a buyer’s requirements through our ‘Wanted’ section on our dedicated Alternative Market Place website
• Following a prospective seller making an offer, we will take up references (if not registered with us) and assess their ability to supply
• Proactively drive communications and negotiations between buyer and prospective sellers until close of deal
• Arrange to find and link prospective buyers with competively priced refurbishers, forwarders, wind farm developers, construction firms and installation and service maintenance providers on a world wide basis

CHARGES

We keep service agreements with our clients very simple and taylor our commision rates according to what is on offer, the qty of turbines to be marketed and their total current $ market value. Typically, for smaller sized turbines, we charge a slightly higher sales commission than for top range, high MW machines so not to risk to out-price your turbines when going to market. Our commission fees are always paid by the seller, buyers are not being charged for any of our services.

We offer both, exclusive or non-exclusive services.

Commission rates/Sales Value

• Up to $20,000 p.u. – 6% exclusive – 8% non-exclusive
• Over $20,000 p.u. – $50,000 – 5% exclusive – 7% non-exclusive
• Over $50,000 p.u. – $100,000 – 4% exclusive – 6% non-exclusive
• Over $100,000 p.u. – $500,000 -3% exclusive – 5% non-exclusive
• Over $500,000 p.u. – $1m – 2% exclusive – 4% non-exclusive
• Over $1m p.u. – 1.5% exclusive – 3% non-exclusive

To sell your turbine/s through our premium promotion service or if you like us to source your desired wind turbine for you, then please submit your details by using the ‘Buy & Sell’ button on the top right. If you prefer a non-commital and informative chat first, then please contact us either by email using the ‘Contact Ad Owner’ box above or by phone and find out how we can help your business by sourcing your desired wind turbine/s or by accelerating the sale of your wind turbines.

Kind regards

Ralph Peters
Managing Director

MyWindPowerSystem.com

Tel.: +44(0)7962 420898
web: http://www.mywindpowersystem.com

In good condition with new gears – Year of build 1997. Only $344,000 per unit

Already dismantled – Ready to ship

Current location: Denmark

NEG Micon 600kW Wind Turbine - for illustration only!

Hub height 45m
3 Section tower – easy to transport

• Surface : 1452 m²
• Power density : 2.42 m²/kW
• Wings number : 3

TECHNICAL SPECIFICATION:

Download pdf file: Micon NM 600 hovedspec-1