Are you planning to repower?

Want to sell your exisiting wind turbines?

Want to achieve the best sales price?

Are you searching for a used wind turbine?

Then contact MyWindPowerSystem.com – Your No. 1 online broker for used and refurbished second hand wind turbines

‘Ready to Buy’ clients waiting for:

Vestas – NEG Micon – NordTank – Bonus – Tacke – WindMaster – GE – Enercon – Lagerway – Gamesa – Acconia – Suzlon – WindMatic etc.

All turbine sizes considered – From 2kW – 6mW

From single units to complete wind park sales!

Flexible sales commssion rates available!

Our premium Service includes:

SELLERS

• Achieving the highest possible sales price for your used turbines
• Preparation of brief details for mail shot and internet postings describing the turbine for sale to assist in finding a buyer
• Advertise and promote your turbines for sale through our dedicated Used Wind Turbines Market Place website and if required, prepare and post feature articles on our front homepage placed in the top banner area currently attracting 30k+ unique visitors pcm – trending up
• Conduct mail shot promotions to suitable prospects from our world wide register of ‘ready to buy’ clients currently looking to purchase turbines for small to large wind farm projects in the range of 500KW up to 100MW+
• Following a prospective buyer making an offer, we will take up references (if not registered with us) and assess their ability to complete a purchase
• Arrange for prospective world wide buyers to visit and view the turbines on site.
• Proactively drive communications and negotiations between seller and prospective buyers until close of deal

BUYERS

• Achieve the best possible purchase price for a used turbine
• Registered buyers are served with a premium ‘automated notification’ service informing the same of newly available turbines within hours of going to market
• Preparation of brief details for mail shot and internet postings describing the required turbine wanted to assist in finding a seller
• Advertise and promote a buyer’s requirements through our ‘Wanted’ section on our dedicated Alternative Market Place website
• Following a prospective seller making an offer, we will take up references (if not registered with us) and assess their ability to supply
• Proactively drive communications and negotiations between buyer and prospective sellers until close of deal
• Arrange to find and link prospective buyers with competively priced refurbishers, forwarders, wind farm developers, construction firms and installation and service maintenance providers on a world wide basis

CHARGES

We keep service agreements with our clients very simple and taylor our commision rates according to what is on offer, the qty of turbines to be marketed and their total current $ market value. Typically, for smaller sized turbines, we charge a slightly higher sales commission than for top range, high MW machines so not to risk to out-price your turbines when going to market. Our commission fees are always paid by the seller, buyers are not being charged for any of our services.

We offer both, exclusive or non-exclusive services.

Commission rates/Sales Value

• Up to $20,000 p.u. – 6% exclusive – 8% non-exclusive
• Over $20,000 p.u. – $50,000 – 5% exclusive – 7% non-exclusive
• Over $50,000 p.u. – $100,000 – 4% exclusive – 6% non-exclusive
• Over $100,000 p.u. – $500,000 -3% exclusive – 5% non-exclusive
• Over $500,000 p.u. – $1m – 2% exclusive – 4% non-exclusive
• Over $1m p.u. – 1.5% exclusive – 3% non-exclusive

To sell your turbine/s through our premium promotion service or if you like us to source your desired wind turbine for you, then please submit your details by using the ‘Buy & Sell’ button on the top right. If you prefer a non-commital and informative chat first, then please contact us either by email using the ‘Contact Ad Owner’ box above or by phone and find out how we can help your business by sourcing your desired wind turbine/s or by accelerating the sale of your wind turbines.

Kind regards

Ralph Peters
Managing Director

MyWindPowerSystem.com

Tel.: +44(0)7962 420898
web: http://www.mywindpowersystem.com

I am able to collect from anywhere within the US. Offers from outside the US, please provide shipping costs to L.A. seaport.

Turbine must have the following specification:

Model: Skystream 3.7
Rated Capacity: 2.4 kW
Weight: 170 lb (77 kg)
Rotor Diameter: 12 ft (3.72 m)
Swept Area: 115.7 ft2 (10.87 m2)
Type: Downwind rotor with stall regulation control
Direction of Rotation: Clockwise looking upwind
Blades: 3-Fiberglass reinforced composite
Rated Speed: 50 – 330 rpm
Maximum Tip Speed: 216.5 ft/s (66 m/s)
Alternator: Slotless permanent magnet brushless
Yaw Control: Passive
Grid Feeding: 120/240 VAC Split 1 Ph, 60 Hz 120/208 VAC 3 Ph compatible, 60 Hz (other configurations available)
Battery Charging: Battery charge controller available for battery charging systems
Braking System: Electronic stall regulation with redundant relay switch control
Cut-in Wind Speed: 8 mph (3.5 m/s)
Rated Wind Speed: 29 mph (13 m/s)
User Monitoring: Wireless 2 way interface
Survival Wind Speed: 140 mph (63 m/s)

entire USA.
Sorry, no international sales.

These wind turbines work great alongside solar panels to help

you have a better chance of producing some free power. As

we all know there are days when the sun just doesn’t shine

and your solar panels make almost no power. Days like this are

where wind turbines can enhance your chance of making free

power.

This item is a brand new USA Wind Generator Model 300-HD

wind turbine with manual furling. You are buying the complete

wind turbine only and not the test stand.

The motor comes with our 6061 T-6 machined arbor and ABS

plastic 3/16″ six blade prop hub with 6 blades. That’s right, 6

blades.

This turbine requires an average of 7.2 mph to begin turning

BUT… as soon as it starts turning it is charging your batteries.

In other words, if you can see it turning AT ALL you are

charging your batteries at least a little bit. Direct short tests

show 300-350 watts average output in 20 mph winds. Please

note that some motors will be tighter and require more wind

for startup until the motor is properly broken in.

It appears from our testing that this unit has some built in

overspeed protection.I have run the test unit in occasional 40

mph gusts and sustained 18-20 mph winds and it did not

overspeed nor did it sustain and blade damage during weeks

of testing.

I consider 15 mph to be the perfect wind for operating this

unit.

This unit is, in a word, unique when compared to other small

turbines. I find it refreshing to watch and it’s function reminds

me of the huge wind turbines that I see alongside the

interstate highways. It’s operation is, for lack of a better word,

gracefull. It turns slowly and charges your batteries unlike

most all small wind turbines that must spin several hundred

rpm to even start to charge your batteries.

Now on to a totally detailed description of its construction:

The six (yes, six blades) prop blades included with this turbine

are about 44″ across ( about 22″ each measured from the

center of the prop hub) . These light weight blades are made

from lightweight pvc pipe and were developed specifically for

lower start up speeds and in most cases will start turning the

turbine at 7.2 to 8.2 mph depending upon how long the

turbine motor has been run-in. Some new motors are tighter

and will require more wind to start turning.

The prop hub is made of 3/16″ ABS plastic and can be run

with 2,4, or 6 blades.

The arbor connecting the prop hub to the motor is machined

from 6061 T-6 aluminum.

The motor comes from the factory sealed from all weather.

The main beam is made of 3/4″ steel square tubing and

painted with black enamel.

The downtube that will eventually slip into your mounting pipe

(15\16″ to 1″ i.d.) is securely welded to the main beam by a

certified welder.
The tail fin is made of white plastic and is bolted to the

adjustable tail beam with a pair of 1/4″ bolts.

The motor cover, which is purely cosmetic and serves no

purpose at all, is made of plastic and painted with enamel.

Colors may vary.

The motor is securely connected to the main beam and will not

move.

A hole is drilled through the main beam and into the downtube

for those that prefer to run your wires through your tower or

pipe.

There is no slip ring because none is needed. Wire twisting has

never been a problem for us.
This is considered to be a 12/24/48 volt system .

All USA WindGen turbines are professionally designed,

engineered and manufactured entirely within the USA.
This turbine is designed to mount to any well secured pipe

with a 15/16″ – 1″ inside diameter.

The current produced by the turbine is DC and it comes with a

blocking diode installed so as not to drain your batteries when

the wind is not blowing.

The turbine comes 95% assembled and with full instructions

explaining how to assemble the final 5%. No special tools or

knowledge are needed.

You are purchasing the complete wind turbine as shown in the

photo and not the test stand that it is sitting on in the photo.

You must also provide your own wiring.

We ship our turbines as soon as payment clears.We only ship

to confirmed paypal adress’.

The turbines are professionally packaged.

Please ask all your questions before you bid and we will gladly

answer them.

We expect payment within 3 days of the end of the sale.
We answer email from 8-5 CST M-F.

We have a very clear return policy near the bottom of the

page. Please take the time to read it.

We ship fast. Really fast.

We package professionally.

Each and every unit is tested and produces rated power at

stated windspeeds before boxing.