Priced to Sell!!

These two sets are from a cancelled order which we shipped to Detroit- USA and are still originally packaged. The turbines come with manufacturers standard warranty and are immediately available.

The shipment will arrive in Detroit by sea approx. mid July 2010

Includes: Wind Generator, Inverter/Controller & 8M Guyed Tower

Both complete sets only $5,250.00 USD

Also sell single unit for $2625.00

Warranty Incl : 2 years for generator, 1 year for all other parts.

GENERAL DATA:

NOISE INDEX: MODEL H3.1-1000W    LAeq=30 dBA 5m behind turbine@5m/s gusting

Parts and Accessories:

• Hummer wind turbine includes the body, tower plus accessories, and controlling units.
• Body includes: rotor blades, generator, yaw shaft, nose cone, tail pole, tail wing, etc.
• Tower and accessory: pole, nut, pedestal, guy wire, anchor, and cable, etc.
• controlling unit: controller ,inverter and load dumping. The generator, blades, nose cone,
• shaft, tail pole, tail wing, tower, anchor, etc are all spray-painted, galvanized and antisepticised.

Generator:

•    This generator is the most advanced in the world, which has four patents.
•    It is extremely light and small, high in efficiency–more than 0.78 of utilization ratio.

• Low in energy consumption, noise and speed-up wind speed (3m/s for 1000W).
• Swift running: hummer generator runs 1.5 – 3 times faster than other types of  generators under equal conditions due to lightness, high efficiency and low resistance.  As a result it can output more power than others.
• Swift charging: due to high efficiency and low wind start-up, the running time of hummer generator will be longer than conventional ones, and that is why it can charge batteries faster than others.

Hybrid Off-grid Controller/Inverter:

Control System:

● The power efficiency has been highly improved by using IGBT.

● With the automatic program optimization of MPPT the generator capacity is highly improved.

● LCD indicates information simultaneously.

● Real-time working power curve can be seen from the PC interface.

● Several optional communication interface includes power line carrier, RS485, wireless data transmission.

● Comprehensive protection function with highly reliability

● Wide AC voltage range

● Freely set working curve chart

● Simple, reliable and special plug connection

Rotor blade:

• Blades can typically be made of glass fiber reinforced plastic or aluminum alloy.
• The Hummer blade is designed by aerodynamic experts according to the airscrew structure and the wind power utilization ratio enhances up to 0.78.
• Most turbine blades have weak endurance through gale force type winds, they break easily in low temperature, the usable time in gale area is usually no more than 3 years, etc, Hummer has designed a new wind turbine blade, which can bear gale  force winds.
• The hummer wind blade’s successful application prolongs the entire wind turbine’s service life to 10-15 years more. With the auto-deflection tech, it operates stable-quietly and soundlessly, and also brings enormous convenience for use and replacement.

Nose cone:

• The nose cone is made of reinforced aluminum alloy.
• It’s located in front of blades to reduce the wind resistance. The generator is enclosed in the nose cone, which is favorable for heat dispersion.
• Protection cover: It is located between the blades and nose cone, and is made of reinforced aluminum alloy to further reduce the wind resistance and protect the generator.
• Yaw shaft: It is made of superior steel to integrate blades, the generator, tail pole, tail wing and tower. Inside the yaw shaft there are slip rings to prevent the cable from twisting.
• Tail pole: It is light with high intensity and made of manganese steel.
• Tail wing: It is made of stainless steel, inflexible, auto-deflection in high wind condition, reliable and sharp in speed limitation.
• Tower: It is made of carbon steel, with several sizes of outer diameter and height. They are anticorrosion, as well as UV-proof.
• Guy wires & anchors: Guy wire adopts button structure, and arrow like anchor, so it is much easier for installation
• Surface coating & protection: All the parts are static molded and then galvanized, so they are anticorrosion, UV-proof, crashworthy, fastness and will be fresh all year round.

• All the parts are made of high quality aluminum alloy and superior steel, which can be used in the temperature ranging from -45℃to 45℃, in the surroundings of high wet, sand salt or frost areas.

Contact Ad owner for quick sale

Only $250,000 USD or nearest offer for all 4 units ($62,500 USD per unit)

• There are two 50m towers coming with the 4 units

• Year of build: 1997:
• Location: USA, CA
• Demonstration units for India market: 50 cycles
• Ship terms: ExWorks owner’s site, loaded onto truck

The four units costs $3.5 million U.S. to build in 1997. They were demonstration units and were not used commercially so no wear and tear except for the two incomplete turbines exposed to dry weather conditions (Mojave desert). The two complete units are in covered storage.

TECHNICAL SPECIFICATIONS:

DOWNLOAD WIND EAGLE 300 – DETAILED DESCRIPTION SHEET:

WE300 description.doc

DOWNLOAD WIND EAGLE 300 – BROCHURE

windeagle300.pdf brochure

Contact ad owner for further details

One is currently in operation in the US following a complete rebuild in 2007.

The 2nd turbine rebuild will be complete May 15, 2010.

A decommissioning fee of $500 will apply for each turbine and includes loading onto truck on site

Each set include:

• 80 ft tilting tower
• gin pole
• guy wires
• related hardware

One of the most successful designs from the mid 1980s – 2 blade, downwind with conical stabilizer. Rated 25 KW at 27 mph wind. Composite blades, stall regulated w/flyball back up.

These 2 turbines have had regular service since installed in 1985 and operated successfully in sub zero conditions. Towers have two 40 ft sections and are sleeved and galvanized. They they can be transported via truck or trailer. Price does not include dismantling – reason for selling…installing a larger turbine. Would like to sell the 2 as a pair = 50 KW.

TECHNICAL SPECIFICATION:

• - 32ft rotor
• - composite blades NASA airfoil – twisted tapered design – aerodynamic stall
• - 120 rpm rotor speed – tetering hub
• - flyball overspeed control as back up to elelctric brake
• - rated 25 KW at 26 MPH wind
• - tower is tapered galvanized steel – 2 pc sleeve
• - tower is 4 way guyed includes gin pole and related guy wires and hardware
• - foundaiton plans available on deposit
• - induction generator – single phase

DOWNLOAD FULL TECHNICAL SPECIFICATIONS:

carter 25kw technical specifications.doc

For further information use the ‘contact ad owner box’

New Price! Reduced to sell, now only $6500.00 USD

This used wind turbine for sale is from 1983 and has only produced 5830kWh. Currently installed in Minnesota – USA and grid-tied. This machine was made for 110V AC utility connected. The turbine was not a very well sited installation. It comes with a 60′ Rohn SSV lattice tower which is in very good condition.

Technical Specification:

Make: Enertech Corporation
Model: Thunderbird 4000
Blades: 3
Diameter: 17.9ft
Volts: 220AC
Cut in speed: 8mph
Rated output: 4kW
Max. O/P: 4.7kW
Speed: Stall

The System comes with Grid-Tie controllers. Blades in need of replacing – otherwise parts are complete with exception of 1 tip brake – all original.

Turbine can be broken down to into 3 x 20′ sections or further if necessary -

Dismantling to be arranged by buyer. Price including dismantling and loaded onto truck, please add $1,200.00

Are you planning to repower?

Want to sell your exisiting wind turbines?

Want to achieve the best sales price?

Are you searching for a used wind turbine?

Then contact MyWindPowerSystem.com – Your No. 1 online broker for used and refurbished second hand wind turbines

‘Ready to Buy’ clients waiting for:

Vestas – NEG Micon – NordTank – Bonus – Tacke – WindMaster – GE – Enercon – Lagerway – Gamesa – Acconia – Suzlon – WindMatic etc.

All turbine sizes considered – From 2kW – 6mW

From single units to complete wind park sales!

Flexible sales commssion rates available!

Our premium Service includes:

SELLERS

• Achieving the highest possible sales price for your used turbines
• Preparation of brief details for mail shot and internet postings describing the turbine for sale to assist in finding a buyer
• Advertise and promote your turbines for sale through our dedicated Used Wind Turbines Market Place website and if required, prepare and post feature articles on our front homepage placed in the top banner area currently attracting 30k+ unique visitors pcm – trending up
• Conduct mail shot promotions to suitable prospects from our world wide register of ‘ready to buy’ clients currently looking to purchase turbines for small to large wind farm projects in the range of 500KW up to 100MW+
• Following a prospective buyer making an offer, we will take up references (if not registered with us) and assess their ability to complete a purchase
• Arrange for prospective world wide buyers to visit and view the turbines on site.
• Proactively drive communications and negotiations between seller and prospective buyers until close of deal

BUYERS

• Achieve the best possible purchase price for a used turbine
• Registered buyers are served with a premium ‘automated notification’ service informing the same of newly available turbines within hours of going to market
• Preparation of brief details for mail shot and internet postings describing the required turbine wanted to assist in finding a seller
• Advertise and promote a buyer’s requirements through our ‘Wanted’ section on our dedicated Alternative Market Place website
• Following a prospective seller making an offer, we will take up references (if not registered with us) and assess their ability to supply
• Proactively drive communications and negotiations between buyer and prospective sellers until close of deal
• Arrange to find and link prospective buyers with competively priced refurbishers, forwarders, wind farm developers, construction firms and installation and service maintenance providers on a world wide basis

CHARGES

We keep service agreements with our clients very simple and taylor our commision rates according to what is on offer, the qty of turbines to be marketed and their total current $ market value. Typically, for smaller sized turbines, we charge a slightly higher sales commission than for top range, high MW machines so not to risk to out-price your turbines when going to market. Our commission fees are always paid by the seller, buyers are not being charged for any of our services.

We offer both, exclusive or non-exclusive services.

Commission rates/Sales Value

• Up to $20,000 p.u. – 6% exclusive – 8% non-exclusive
• Over $20,000 p.u. – $50,000 – 5% exclusive – 7% non-exclusive
• Over $50,000 p.u. – $100,000 – 4% exclusive – 6% non-exclusive
• Over $100,000 p.u. – $500,000 -3% exclusive – 5% non-exclusive
• Over $500,000 p.u. – $1m – 2% exclusive – 4% non-exclusive
• Over $1m p.u. – 1.5% exclusive – 3% non-exclusive

To sell your turbine/s through our premium promotion service or if you like us to source your desired wind turbine for you, then please submit your details by using the ‘Buy & Sell’ button on the top right. If you prefer a non-commital and informative chat first, then please contact us either by email using the ‘Contact Ad Owner’ box above or by phone and find out how we can help your business by sourcing your desired wind turbine/s or by accelerating the sale of your wind turbines.

Kind regards

Ralph Peters
Managing Director

MyWindPowerSystem.com

Tel.: +44(0)7962 420898
web: http://www.mywindpowersystem.com

to it, it will start turning in as little as 3-4 mph winds. I consider 20 mph winds to be perfect and 25-30 mph winds to be about maximum.

Some new motors are tighter (until broken in) and will require more wind to begin turning.

What can you use this turbine for? Well let me give you a few ideas.

1. Under good conditions (20+ mph winds) this unit will put out around 30 watts of power at around 13 volts. This will slowly trickle charge a 12 volt

battery. Just connect it to your battery red-red, black-black and it will work. No charge controller is needed.

2. If it’s turning at all (4-5 mph winds) it will charge any of your AAA, AA, C or D rechargable batterys. You’ll need to make a simple connector (not

included) and you’ve got hot batterys for your camera, Ipod, etc. anywhere you go. Hikers, hunters, boaters, etc. can really appreciate this.

3. I get emails almost every day from folks that want a real small wind turbine to power a small dc light bulb when it’s turning. They just want to see

a light burning when they look out the window at night or while sitting on the porch in the evenings. This unit will do that also. If it’s turning it will

light the bulb (not included) and it gets brighter as wind speed increases.

4. This unit is perfect for your childs school project or your own alternative energy project.

Here’s a detailed description of the item:

The unit is small, about 21″ long from the tip of the arbor to the end of the tailfin.
It comes with a blocking diode installed so as not to discharge your battery when the wind isn’t turning.

The main beam (frame) is made of 3/4″ steel square tubing and painted black. Plastic plugs are used to cap the ends of the turbing.
The downtube (the part that slips into your mounting pole, etc.) is 7/8″ o.d. steel and is welded to the main beam.
The tail fin (which keeps it pointed into the wind) is made of inexpensive white plastic and is bolted to the main beam.
The generator motor is solidly clamped to the main beam with a pair of steel bands.

The motor cover is made of pvc plastic and painted.Style and colors my vary.
Three blades come with the unit. They are made from thinwall pvc plastic pipe and were especially designed for low startup speeds.

The blades are about 17″ long each making the prop disc about 34″ across.
The arbor which connects the motor and prop hub is machined from 6061 T-6 aluminum.
The prop hub is made from 3/16″ ABS plastic and is light and strong.

The unit comes 95% assembled and any 12 year old can bolt on the tail fin, hub and blades in less than 10 minutes.

Includes: Wind Generator, Inverter/Controller & 10M Guyed Tower

2Kw Hummer Wind Turbine

*Please note: Batteries are NOT included.

Complete system SPECIAL OFFER: US $4,765.00

Regular Retail Price US $5,292.00

Power Data 2000W

Rated Output (W)- 2000
Max output 3500
Charge Voltage(V) DC 120V
Numbers of blade 3
Blade material GRP
Blade diameter (m) 3.8
Start up wind speed (m/s) 3.0
Rated wind speed (m/s) 9.0
Rated rotate speed (r/min) 450
Wind Utilize Ratio (Cp) 0.45
Generator Efficiency >0.78
Pole Diameter(mm) Ф120
Tower Height (m) 10

Warranty Incl : 2 years for generator, 1 year for all other parts
*Can add up to 1000 watts of solar panels to this wind-solar hybrid system
*Optional 1 Year Extended Warranty (on generator) – $185.56 USD

2Kw Hummer Inverter/Controller

Individual Component Prices (Off-grid)

Generator – $2635.00 USD
Hybrid Controller / Inverter – $1408.48 USD
10M Guy Tower – $1047.93 USD
10M Free Standing Tower – $3258.90 USD

2 Kw Hummer Power Curve

On-grid Prices:

Complete System – Reg. $7289.00 USD, On Sale $6562.00 USD
Generator – $2635.00 USD
Grid-tie Inverter – $4095.25 USD
10M Guy Tower – $1047.93 USD
10M Free Standing Tower – $3258.90

Optional CSA Approved Inverter and Rectifier available:

Aurora Inverter

The Aurora inverter ($4095.25 USD) is intended for direct grid-connect, without batteries. It is UL/CSA listed, and thus approved by your power company for use. The PVI-WIND-INTERFACE is $795.00 USD.For further information please contact ad owner

Off-Grid Complete System Available For $143,945.00 USD

• Includes: 50KW Generator, 50KW Grid-tie Controller, 25M Free Standing Tower, Grid-tie Inverter & Blades)

• Volume Discounts available: Qty 10 (3%), Qty 20 (5%), Qty 50 (10%) & Qty 100 (15%)

SAIP AH-50KW Wind Turbine

Specifications:

50KW wind turbine generator

Power: 50kw
Blade diameter: 18m
Rated Rotated speed: 80
Rated wind speed: 11 m/s
Rated power: 50kw
Max power: 55kw
Output voltage: 380v
Start up wind speed: 3.5m/s
Operating wind speed: 3-25m/s
(Security wind speed):50m/s
Height of tower: 25m
Weight of top section: 2050kg
Tower pole type: 800steel tube*10mm

Output control system: Charge controller inverter
Blades: Fibre glass
Capacity and quantity of battery: 12V 200AH

50KW On-Grid Controller

The SAIP AH-50KW can supply power for:

Village using air conditioning, refrigerators, washers, water pumps, electric rice-cookers, color televisions, illuminations, electric fans and other charges

SAIP 50KW Power Curve

Please contact us to place your order & to make shipping arrangements. Direct shipping to your door is based on weight & destination.

You can place your order for this item either by phone at +44(0)7962 420898 or by email through the Contact Ad Owner form.

Shipping Options (Canada):

(1)Ship Direct – Shipped direct to your door.
(2)Dock Pick-up – Pick up at your nearest sea port dock FOR FREE! (Direct from MFR)
(3)Custom Quote by email based on total weight of shipment & your location. Contact Us  by using Contact Ad Owner

Shipping Options (US):

(1)Custom Quote by email based on total weight of shipment & your location. Contact Us  by using Contact Ad Owner

Includes: Generator, Blades, Hub, Tail, Controller, Off-Grid Sine Wave Inverter & 6M Guy Tower.

Individual Component Prices:

Generator, Blades, Hub & Tail – $1,110.87 USD
Controller & Inverter – $286.95 USD
6M Guy Tower – $368.07 USD

Specifications:

General Data:

Protection Level – IP54
Insulation Level – B
Cooling Mode – IC0041
Drive Mode – Direct driven by wheel
Adjust SpeedMethod – Automatic
Adjust Direction Method- Automatic
Executive standards – CE certificate
Temperature: -40~+60 Celsius degree
Humidity: less than 95%

Generator Specs:

Model – 500W
Rated power( W) – 500
Rated voltage( DCV) – 24
Rated voltage( ACV) – 17
Rated current( DCA) – 21
Rated current( ACA) – 27
Magnetic pole count – 10
Rated speed( rpm) – 400
Max speed( rpm) – 500

Blades:

Material of blades – Fiber glass
Number of blades – 3
Diameter ( m) – 2.5
Area( m2) – 4.90
TSR – 7

Off-Grid Controller:

Model – 500W
Dump loader power( W) – 500 Watts
Batteries rated voltage( V) – 24V
Float charge voltage( V) – 30V
Overvoltage( V) – 30V
Over charge resume voltage( V) – 28V
Undervoltage( V) – 21
Under charge resume voltage( V) – 24V
Net weight( kg) – 2 KG
Working – Continuous and Intelligent
Temperature: -10~40 Celsius degree
Humidity: less than 85%

Sine Wave Inverter:

Output:

Wave model – sine wave，THD65%
Noise – 50db
Protection – limited output when over load over load/short circuit protection
Inhibiting capacity of off- communication reaching FCCA
Indicator light – inverter under normal state(green light), low voltage of battery(red light),
Over load(red light), breakdown(red light).
Alarm – alarm once per 4 seconds when main is cut down
Alarm once per second when battery is almost empty
Continuing alarm when breakdown or running out of battery
Computer interface – 9PinD Type connector(Option)
Environment: temperature – 0~40℃
Humidity – reaching 95% if not freezing
Size (W×H×Dmm)- 560×280×365
Input device – Power line

Remark; All inverters can be set as AC110V/120V/220V/230V single phase and 50Hz/60Hz output, but only 5kw, 10kw, 20kw have AC380V, three phases output.

Guy Cable Tower:

Height – 6 Meters
Diameter – 89 mm
Thickness – 3.25 mm
Sections – 2
Weight( kg) – 41.8 KG

Manufactured by: Yangzhou Shenzhou Wind-Driven Generator Co.,Ltd

Complete System Includes: Generator, Blades, Hub, Tail, Controller, Inverter, Off-Grid Modified Sine Wave Inverter & 6M Guy Cable Tower

Specifications:

General Data:

Protection – Level IP54
Insulation – Level B
Cooling Mode – IC0041
Drive Mode – Direct driven by wheel
Adjust SpeedMethod – Automatic
Adjust Direction Method under 2000W Models – Automatic

Generator Specs:

Model – AEOLUS300
Rated power( W) – 300
Rated voltage( DCV) – 12/24
Rated voltage( ACV) – 8/17
Rated current( DCA) – 25/12
Rated current( ACA) – 35/17
Magnetic pole count – 8
Rated speed( rpm) – 450
Max speed( rpm) – 600
Weight( kg) – 12.5

Blades:

Model – Aeolus 300
Material of blades – Carbon fiber
Number of blades – 3
Diameter ( m) – 1.5
Area( m2) – 1.80
TSR – 3

Off-Grid Controller:

Model – Aeolus 300
Dump loader power( W) – 300
Batteries rated voltage( V) – 12/24
Float charge voltage( V) – 15/30
Overvoltage( V) – 15/30
Over charge resume voltage( V) – 14/28
Undervoltage( V) – 10.5/21
Under charge resume voltage( V) – 12/24
Working – Continuous and intelligent
Circumstance – Temperature: -10~40 Celsius degree

Humidity: less than 85%

Remark: Inverter can be set as AC110V/120V/220V/230V single phase and 50Hz/60Hz output – No AC380V, three phases output.

Guy Cable Tower:

Model – Aeolus 300
Height( m) – 6
Diameter ( mm) – 48
Thickness – 2.5
Sections – 3 (2 meter sections)
Weight( kg) – 23.5

Shipping Options (Canada):

In-store Pick-up – No shipping charges.

Ship Direct – Shipped direct to your door.

Dock Pick-up – Pick up at your nearest sea port dock FOR FREE! (Direct from MFR)

Custom Quote by email based on total weight of shipment & your location. Contact Us by email.

Shipping Options (US):

Ship Direct – Shipped direct to your door.

Custom Quote by email based on total weight of shipment & your location. Contact Us by email