Offers in the region of 1.8m EUR ($2.45m USD)

Price is ‘As is’ ‘Where is’ – ExWorks owners site

Plus dismantling

Full service history available

The wind turbine is still in operation and can be viewed operating.

The NM92/2750 is constructed for timesaving “lift in one installation”. This
means that the wind turbines can be transported as pre-assembled units
ready for installation on foundations offshore. Prior to this, the wind turbines are
assembled and mounted on trial foundations and tested on land.
• For offshore use, the wind turbine is provided with all of the necessary emergency equipment, fire-fighting.

Operating data NM92

Nominal output 2750 kW

Output regulation PRVS

Nominal wind speed 14 m/sec

Cut-in at 4 m/sec

Cut-out at 25 m/sec

Rotor

Rotor diameter 92 m

Swept area 6648 m2

Number of blades 3

Rotor revolutions 15.6 rpm

Brake system

Blade brakes Each blade can be pitched

individually, and each has

its own back-up system

Disc brakes One unit mounted on the

high-speed shaft

Drive train

Gear type 3 step planetary/

helical hybrid

Gear ratio 1:70.65

Main shaft Forged shaft and flange

Main bearing Spherical roller bearing

Cooling Oil cooling with pump

Generator

Type Double-fed

asynchronous generator

Voltage – stator 960 V

Voltage – rotor 690 V

Nominal frequency 50 Hz

Rated power 2750 kW

Cooling Water

Yaw system

Type Double ball race with

internal gearing

Yaw brakes 5 hydraulic brake callipers

Yaw motor/gears 5 electrically driven

planetary gears

Tower

Type Conical steel tower,

painted

Hub height 70 m or depending on

location

Control

Type Computer controlled

Cut-in system Soft with frequency

converters

Remote monitoring Modem

Lightning protection

Superstructure to most recent international norms.

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves.

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

5. The displayed location in the ‘Google Maps’ section of this

Absolute bargain – 70% below new – Priced to sell quick

PRICE “as is, where is” ONLY EUR 7,400,000 ($9.6m USD)

New price is approx. 23m EUR ($30m USD)

Power Plant consists of 3 x 8mW Alstom Dual Fuel Gas Turbines

GAS TURBINE PACKAGE:
• Manufacturer: ALSTOM (USA)
• Manufactured : 2002/2003
• 50 / 60 Hz currently configured to 60hz, can be converted to 50hz before shipping if required)
• 3 x 7.9 MW
• 13.8 kV each
• Hours (March 31, 2010):
o GTG # 1 : 9,635 hours since new / 314 starts
o GTG # 2 : 3,049 hours since new / 160 starts
o GTG # 3 : 11,187 hours since new / 284 starts
• Dual Fuel : Natural gas / Diesel Oil
• Portable, easy to move, self contained, outdoor enclosed (no building needed!)
• Spares Parts : value over EUR 1.0 Mill included!!!!
• Condition: very good, exceptionally well-maintained, low hours
• Availability: still installed but decommissioned
• Location: South America

The preferred solution is to have 2 units operating and 1 unit on standby to ensure maximum reliability and availability of the power plant. The modular approach enables maximum site operational flexibility and will ensure very high levels of overall site availability. The 2003 model Tempest is fitted with the ‘world’s leading Dual Fuel Dry, Low Emission (DLE) system which is able to reduce NOx emission to levels as low as 10ppm!!
PRICE “as is, where is” EUR 7,400,000 ($9.6m USD)
(PRICE NEW approx. EUR 24.0 Million)

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves.

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

$240.000,00 purchase  or willing to lease monthly at going rates

MyWindPowerSystem Ltd. works with highly skilled remanufacturers, refurbishers and machinists to ensure the re-manufactured equipment is properly restored to the original manufacturers specifications and is refurbished according to our high standards.

Refurbished wind turbines offered by MyWindPowerSystem Ltd. are completely disassembled and thoroughly inspected and cleaned. Our highly experienced wind turbine refurbishment affiliates evaluate the condition of the reconditioned wind turbine and replace all wear parts. The main moving components will be reconditioned to new or better than new standards. The controls, gearbox, hub, generator, hydraulic system are all thoroughly reconditioned and are either restored or replaced. All refurbished wind turbines come with a full technical report of the reconditioning work undertaken.

Completed refurbished wind turbines are restored to the original manufacturers specifications and offer a minimum warranty of 1 year. Extended warranties may be purchased upon request.

Depending on the turbine type and size, a typical reconditioning process takes approximately between 3 months and up to 1 year for very large size turbines.

Description of the reconditioning process:

• Tower/Head: Inspect/replace as needed welds, bearings, blast & paint, the unit will have new base bolts. Major axis and adjust on-axis coupling. Analysis of state of the “I / F” with the hub, replacement of bearings and seals on hatches. Verification of tolerances in bearing seat shaft and bearings,
• Gearbox: Check the stage trains, both primary and secondary for backlash and endplay, replace seals and Verification of tolerances throughout the box. Hydraulic System cleaning and priming circuit pressure and leak test. Change seals, filters, fittings Verification of pressure level and vibration load, and repaint.
• Brake unit: Pressure test, replace pads, leading lines (hoses), and rebuild brake caliper – as needed. Meg and test brake motor.
• Yaw system: Meg and test yaw motor. Inspect yaw gearbox, fill with fluid. Inspect, adjust slide shoes, or replace if needed
• Generator: Disassemble generators, dry and impregnate generator, re-dip armatures, and replace bearings. For small generator, check, adjust or replace belts. Test and adjust RPM sensor. Dynamic test analyzes noise and vibration and Thermal Verification test and paint unit.
• Main shaft: Inspect bearings and seals. Check for wear and end play.
• Instruments: Upgrade and test anemometer and wind vane.
• Controller: Tighten all terminations and test the upgraded unit.
• Blades: Inspect tips; replace bushings, pins, if needed. Balance blades to each other.
• SCADA: Upon request, designing and installing a complete SCADA/Remote monitoring system

MyWindPowerSystem Ltd. can arrange to refurbish most wind turbine models to either 50Hz or 60Hz

If you decide to purchase a used wind turbine including refurbishing, please let us know at the time of inquiry and we are happy to provide a detailed price quote including a complete refurbishing schedule.

Please contact us with any question you may have about the refurbishing you’re your wind turbine.

Click Here To Contact Us Now.

Are you looking for a well priced used wind turbine? Then look at our marketplace with many attractive offers for all brands and in all price ranges! click here

RELATED LINKS:

• BUY A WIND TURBINE -Hints & Tips

• WHY BUYING A USED WIND TURBINE?

• SELLING ELECTRICITY BACK TO THE GRID

• ADDITIONAL INCOME FOR LAND OWNERS AND FARMERS

Watch this high quality animation. ‘How Does Wind Power Work’?

Your MyWindPowerSystem Team

]]> http://www.mywindpowersystem.com/marketplace/wind-turbine-refurbishment-service-refurbishing/feed/ 0 http://www.mywindpowersystem.com/marketplace/4-x-vestas-v27-225kw-used-wind-turbines-for-sale/ http://www.mywindpowersystem.com/marketplace/4-x-vestas-v27-225kw-used-wind-turbines-for-sale/#comments Sun, 11 Jul 2010 12:32:33 +0000 Ralph http://www.mywindpowersystem.com/marketplace/?p=1116 4 units of the legendary Vestas V27 – 225kW/50hz wind turbines available immediately.

Still in operation in Holland. Total price is €68k EUR ($86,000 USD) per unit – ExWorks owners site.

We offer these 4 units on behalf of one of our clients and these need to go down by no later than November 2010.

• In operation since 1999
• All 4 units are in very good condition and can be viewed in operation.
• Towers are 30m and the top has been adapted to the V27.

• Total price is only €68k EUR ($86,000 USD) per unit – ‘as is’ – ExWorks owners site.

Dismantle costs are extra €10k EUR ($13,000)loaded onto truck or buyer organizes and covers dismantle costs himself.

PERFORMANCE

The expected energy yields for the Vestas V27 at various annual wind speeds (AMWS) is shown below:

The annual electricity consumption of a medium size home is in the region of 4-6 MWh or 11-16 kWh per day. At 6 m/s wind speed the Vestas V27 can provide the average annual energy needs for 100 homes.

2 transformers incl. housing can also be included in the sale for only an additional 3.5k EUR ($4,500 USD) per unit. The current configuration is that 2 turbines are connected to one transformer station.

The 2 transformers specifications are 630 kVA 400/10500V± 2,5;5% off load tap-changer, including housing.

TECHNICAL SPECIFICATIONS:

Please note that these are configured for operation on 50hz grid frequency and would need to be converted to operate on a 60hz grid at an additional cost

• Generator Rating 225 kW at 16 m/s
• Rotor Speed 43 rpm nominal
• Cut-in Wind Speed 3.5 m/s
• Survival wind speed 56 m/s
• Rotor diameter 27m
• Rotor orientation Upwind
• Number of blades 3
• Blade material Fibreglass/polyester
• Control system Pitch controlled
• Gearbox Planetary
• Brakes Disc
• Generator Asynchronous
• Yaw control Powered
• Tower height 31 m
• Tower Free standing

Contact Ad owner for quick sale

Note: Requests for shipping quotes and viewings will only be given and considered if signed LOI (Letter of Intention) has been received. To download the LOI template, please click the link below:

LOI (Letter Of Intention) downloadLOI_Vestas V27 – 225kW_50hz template

42m Nexgen mast with base plate, guy wires, screw in ground anchors, gin pole and mini gin pole.

Lightning conductor kit

Nomad 2 logger with GSM communication and solar panel.

2x vector A 100R anemometers
3x SWI C3 anemometers
2x vector w200p vains
Setra Barometric pressure sensor
sw10k temp sensor

sensor cabling

7 instrument booms

Priced to Sell!!

These two sets are from a cancelled order which we shipped to Detroit- USA and are still originally packaged. The turbines come with manufacturers standard warranty and are immediately available.

The shipment will arrive in Detroit by sea approx. mid July 2010

Includes: Wind Generator, Inverter/Controller & 8M Guyed Tower

Both complete sets only $5,250.00 USD

Also sell single unit for $2625.00

Warranty Incl : 2 years for generator, 1 year for all other parts.

GENERAL DATA:

NOISE INDEX: MODEL H3.1-1000W    LAeq=30 dBA 5m behind turbine@5m/s gusting

Parts and Accessories:

• Hummer wind turbine includes the body, tower plus accessories, and controlling units.
• Body includes: rotor blades, generator, yaw shaft, nose cone, tail pole, tail wing, etc.
• Tower and accessory: pole, nut, pedestal, guy wire, anchor, and cable, etc.
• controlling unit: controller ,inverter and load dumping. The generator, blades, nose cone,
• shaft, tail pole, tail wing, tower, anchor, etc are all spray-painted, galvanized and antisepticised.

Generator:

•    This generator is the most advanced in the world, which has four patents.
•    It is extremely light and small, high in efficiency–more than 0.78 of utilization ratio.

• Low in energy consumption, noise and speed-up wind speed (3m/s for 1000W).
• Swift running: hummer generator runs 1.5 – 3 times faster than other types of  generators under equal conditions due to lightness, high efficiency and low resistance.  As a result it can output more power than others.
• Swift charging: due to high efficiency and low wind start-up, the running time of hummer generator will be longer than conventional ones, and that is why it can charge batteries faster than others.

Hybrid Off-grid Controller/Inverter:

Control System:

● The power efficiency has been highly improved by using IGBT.

● With the automatic program optimization of MPPT the generator capacity is highly improved.

● LCD indicates information simultaneously.

● Real-time working power curve can be seen from the PC interface.

● Several optional communication interface includes power line carrier, RS485, wireless data transmission.

● Comprehensive protection function with highly reliability

● Wide AC voltage range

● Freely set working curve chart

● Simple, reliable and special plug connection

Rotor blade:

• Blades can typically be made of glass fiber reinforced plastic or aluminum alloy.
• The Hummer blade is designed by aerodynamic experts according to the airscrew structure and the wind power utilization ratio enhances up to 0.78.
• Most turbine blades have weak endurance through gale force type winds, they break easily in low temperature, the usable time in gale area is usually no more than 3 years, etc, Hummer has designed a new wind turbine blade, which can bear gale  force winds.
• The hummer wind blade’s successful application prolongs the entire wind turbine’s service life to 10-15 years more. With the auto-deflection tech, it operates stable-quietly and soundlessly, and also brings enormous convenience for use and replacement.

Nose cone:

• The nose cone is made of reinforced aluminum alloy.
• It’s located in front of blades to reduce the wind resistance. The generator is enclosed in the nose cone, which is favorable for heat dispersion.
• Protection cover: It is located between the blades and nose cone, and is made of reinforced aluminum alloy to further reduce the wind resistance and protect the generator.
• Yaw shaft: It is made of superior steel to integrate blades, the generator, tail pole, tail wing and tower. Inside the yaw shaft there are slip rings to prevent the cable from twisting.
• Tail pole: It is light with high intensity and made of manganese steel.
• Tail wing: It is made of stainless steel, inflexible, auto-deflection in high wind condition, reliable and sharp in speed limitation.
• Tower: It is made of carbon steel, with several sizes of outer diameter and height. They are anticorrosion, as well as UV-proof.
• Guy wires & anchors: Guy wire adopts button structure, and arrow like anchor, so it is much easier for installation
• Surface coating & protection: All the parts are static molded and then galvanized, so they are anticorrosion, UV-proof, crashworthy, fastness and will be fresh all year round.

• All the parts are made of high quality aluminum alloy and superior steel, which can be used in the temperature ranging from -45℃to 45℃, in the surroundings of high wet, sand salt or frost areas.

Contact Ad owner for quick sale

Picture for illustration only

• Hub height : 40 mtr
• Rotor dia: 27 mtr

At wind velocity of 12 mtr per second the output is up to 170 K.W and at wind velocity of 14 mtr this turbine gives wind velocity of 180 k.w

The turbine is of 1994 model and in 2005 was imported in Pakistan and was recommissioned in 2008.

Only $160,000 (€130.000) per unit

plus dismantling – ExWorks owner’s site in North Germany

Dismantling in August/September 2010.

• Nominal Output: 500 kW
• Rotor diameter :    40 m
• Hub hight :    65 m
• Year of manufacture :    1997
• Initiation :    1997

These Turbines come on concrete towers which can be dismantled and re-used and re-erected.

Contact Ad Owner for more details!

Note: Requests for  shipping quotes and viewings will only be considered if signed LOI (Letter of Intention) has been received. To download the LOI template, please click the link below:

LOI_Enercon E40 500kw template.pdf

Up to 75 x BRAND NEW  Gamesa G87-2.0MW T78 (50Hz) priced to sell quick – immediately available -

Ready to ship anywhere in the world . Only $2.18m (€1.78m EUR) per unit

Can also sell single units. No minimum order quantity!

Picture for illustration only

• Looking for immediate delivery of a large number of major branded Mega Watt turbines to start your wind farm project?
• Looking to re-power immediately?
• Struggling with long delivery lead times  from major brand turbine manufacturers?

Then this is the deal for you!

150mW of brand new, top of the range Gamesa 2mW Wind Turbines

Ready to ship within days of signing contract!

These also come with manufacturer’s standard warranty.

Picture for illustration only

On behalf of one of our affiliates we are offering:

75 x  GAMESA G87 2.0MW T78m – 50 Hz

• 75 units immediately available
• Type: G87 2.0MW
• Classification: Class IIA/WZII.
• Frequency : 50 Hz
• Tower height: 78m
• Nominal voltage: 20 kV
• Switchgear included
• Transformer included

Pitch and variable speed technology to maximize energy production.

Production of lighter blades using fiberglass, carbon fiber and prepreg method.

Compliance with the main international Grid Codes.

Picture for illustration only

ROTOR

• Diameter 87 m
• Swept area 5,945 m2
• Rotational speed 9.0 – 19.0 rpm
• Rotational direction Clock Wise (front view)
• Weight (incl. Hub) Approx. 37 T
• Top head mass Approx. 107 T

BLADES

• Number of blades 3
• Length 42.5 m
• Airfoils DU (Delft University) + FFA-W3
• Material Preimpregnated epoxy glass fiber +
• carbon fiber
• Total blade weight 6,150 kg

TUBULAR TOWER

Modular type – Height – Weight

• 4 sections – 78m  -203 T

GEARBOX

• Type 1 planetary stage /
• 2 parallel stages
• Ratio 1:100.5 (50 Hz)
• 1:120.5 (60 Hz)
• Cooling Oil pump with oil cooler
• Oil heater 2.2 kW

GENERATOR 2.0mW

• Type Doubly-fed machine
• Rated power 2.0 MW
• Voltage 690 V ac
• Frequency 50 Hz / 60 Hz
• Protection class IP 54
• Number of poles 4
• Rotational speed 900:1,900 rpm (rated 1,680 rpm) (50 Hz)
• 1,080:2,280 rpm (rated 2,016 rpm) (60 Hz)
• Rated Stator Current 1,500 A @ 690 V
• Power factor (standard) 0.98 CAP – 0.96 IND at partial loads and 1 at nominal power.*
• Power factor (optional) 0.95 CAP – 0.95 IND throughout the power range.*

75 x BRAND NEW  Gamesa G87-2.0MW T78 (50Hz) priced to sell quick – immediately available - Only $2.18m (€1.78m EUR) per unit

Do not miss out on this one time opportunity and contact Ad Owner immediately for more details!

Note: Requests for  shipping quotes and viewings will only be considered if signed LOI (Letter of Intention) has been received. To download the LOI template, please click the link below:

LOI_Gamesa G87_2_0MW T78 template.pdf