$83,000
WindMaster 750 EG Used Wind Turbines For Sale – 750KW
- Location: Poland
- Phone: +44 7962 420898
- URL: http://www.mywindpowersystem.com
- Listed: 30/12/2011 1:07 am
- Expires: 341 days, 12 hours
Description
SPECIAL LIMITED OFFER!
If contract signed before 2012 for minimum of 2 units – Special bargain Price at only €50,000 EUR ($67,700 USD) per unit.
=======================================================================================================
For immediate Sale – 6 used WindMaster 750kW (50hz) wind turbines left at this price. Can ship anywhere in the world
Only€65,000 EUR ($83,000 USD) per unit! OR NEAREST OFFER
-As is – Where is-
6 x WindMaster 750kw (50Hz)
MADE IN HOLLAND
These immediately available WindMaster 750 EG are MADE IN HOLLAND and were in operation in Holland producing many years of high profitable revenue for Holland’s largest utility company – High quality maintenance until decommissioned – refurbished blades where necessary – currently in stock in Poland for planned export to the Middle East – Far East – Africa or South America and Australasia
.
WindMaster 750-EGModel : 750 EG – 750KW
Year of build : 1998
Price : €65,000 EUR ($83,000 USD) OR NEAREST OFFER
Number of units available: 6 units left at this price
Blades are fully refubished and newly balanced!
Current Location: Eastern Europe
Already dismantled and ready to ship!
All 6 turbines can be delivered in refurbished condition.
The wind turbines come complete for on-grid operation.
Minimum order quantity: 1
Don’t miss this amazing offer!
This is a one time opportunity for any buyer to either up your existing wind farm by a massive 6.5MW or for the construction of a new wind farm project for a fraction (25%) of the price which a farm would cost if equipped with brand new turbines.
WindMaster 750-E
Number of turbines: 6 available immediately
WATCH THESE TURBINES IN STORAGE:
- WindMaster 750kW before dismantling
Specification:
WindMaster 750/43
Rotor diameter: 43,4 m
-
Generator capacity: 750 kW
-
Shaft level: 48,2 m
-
Working range: 4,5-19 m/s
-
750 kWe at: 13 m/s
-
Year of commissioning : 1998
Yearly production at 6 m/s* : 1.150.000 kWh/year/turbine**
Yearly production at 7 m/s* : 1.684.000 kWh/year/turbine**
Yearly production at 8 m/s* : 2.184.000 kWh/year/turbine**
*10 min average values, according IEA standards on hub (shaft) height
** Weibull factor k=2; 100% availability
Rotor blades and rotor
Number of blades : 2
Material: wood-epoxy-laminate
Tip speed: 73 m/s
Blade length: 20,268 m
Rotation speed: 32 rpm
Rotor surface: 1.480 m²
Generator
Make: AEG or ABB
Rating: 110% of 750 kW continuously ( 1000kW max.)
Type: Squirrel cage asynchronous generator 4 pole
Compensation: 125 kVAR fixed.
Rotation speed: 1.509 rpm
Protection class: IP55
Safety device: 3 PTC’s
Voltage: 660 V
Connection to grid: First connection at speed of 1495 rpm via resistors, next step directly connected, 2 circuit breakers, star connected
Gear box
Make: Flender AG, Germany or Jahnel Kesterman
System: parallel, 3- stagesTransmission: 1: 46,5Oil contents: 320LLubrication: electrical pump
Yaw system Type: free yaw, active yaw back-up.
Motors: 2 hydraulic low speed motors each with gear drive,
Nacelle support : 4-piont ball bearing on toothed wheel
Cable twist control: sensor + computer
Power supply: hydrolic unit A, 3 kW
Angle control: wind vane
Brake system
Type: hydraulically activated disc brake at low speed shaft
Disc diameter: 1,6 m
Numbers of callipers:8
Normal brake time: 4 sec
Activation: overspeed sensors
Power supply: hydraulic Unit A; 3 kW
Pitch system
Type: crank mechanism inside hub: pitch shaft through hollow mainshaft: axial bearing and hydraulic cylinder
Power supply : Hydraulic Unit B, 5,5 kW
Safety system : fail-safe emergency valves and accumulator system
Control system: digital stroke transducer and computer controlled valve
Tower
Tower height: 47m – 1 section (can be cut for easier transportation)
Construction: 1 conic round part
Top part with noise damper and flange.
Foundation bolds: 2×30 pieces, M42; 100 cm long, bolded in 40mm steel ring in steel armoured concrete foundation.
Bold circles: 2,8 m/2,4 mPlatforms: 4; on 3m, 6m, 23m, 43m
Top platform: oil tight
Bottom platforms: fire tight
Cables: carefully tagged and fixed over cable reel in bottom part of tower
Ladders: equipped with safety rail
Noise
Weights
Rotor: 12.800 kg
Rotor blades: 2.500 kgTurbine head excluding rotor: 35.700 kg
Tower: 40.500 kgTotal weight installed: 89.000 kg
Control
Power control: active pitch control
Breaking system: active pitch control and disk break on main shaft.Microprocessor: Mitsubishi
±2,5 and ± 5% off load tap changer
HV Bushings: Elastimold type M 400 AR-3/jLV bushings: DIN 1/1000 A directly connected to cables.Each windmill connected to central distribution rail.Tower to be hoisted over transformer.
Documentations Available
- Full Service History
- Electrical drawings
- Mechanical construction drawings
- Maintenance manuals
- Log books
Can ship anywhere in the world
Only €65,000 EUR ($83,000 USD) per unit! – OR NEAREST OFFER -As is – Where is-
Contact us immediately not to miss out!!!!
Contact Ad owner for quick sale
Note: Seller can assist and arrange shipping.
Viewings will only be arranged if signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will not be accomodated!
Disclaimers:
Above technical data is subject to technical alterations, errors and omissions
1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors
2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.
3. This information should be used for general budgetary reasons only.
4. Pricing and availability is subject to change at any time without notice
5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment6. Please refer to our full terms & conditions. Click here!
9,181 total views, 12 today
14 Responses to “WindMaster 750 EG Used Wind Turbines For Sale – 750KW”
Trackbacks/Pingbacks
- Building Your Log Cabin « windpowerblogger
- Building Your Log Cabin « Blog for Life
- mygifttoyou | About Building Your Log Cabin
- Parapaponzi — Blog — Building Your Log Cabin
- morethenwindpower − All About Building Your Log Cabin
- The Anime Party Zone — Blog — All About Building Your Log Cabin
- Christians Friend » For Building Your Log Cabin
Other items listed by Ralph
- Pauwels Wind Turbines Transformer 800kVA (50Hz)
- Windmatic 15S – 65KW Wind Turbines For Sale – Remanufactured
- Used Wind Turbines For Sale – Vestas – Bonus – Enercon – GE – Tacke – Nordex – DeWind – Wind World – Over 200 Units of Various 450kW – 1.5mW
- 5 Used Suzlon 600KW or Suzlon 1.25MW Wind Turbines Wanted
- GREENEX2010
Dear Sirs
We are seriously interested in your wind turbines. Please contact us as soon as possible and issue us a P/I for 2 sets of your used wind turbines. Please kindly be noted that we need to get those 2 sets refurbished according to WindMaster 5 year specification schedule. We are going to sign the contract before 2012 for 2 units, so please offer us your best pricing.
Look forward to hearing from you soon.
Sincerely
Asian Sustainable Energy Innovators Company
What is the low level decibel readings at 500 feet? Where do I find information on these units?
Dear Sir,
I could be interested in the 30 used wind turbines for sale in
Bristol I will try to come up to view them can you give me a full
history, and why they are now dis-used is the manufacturer still
operating.also possible for a reduction if I took the 30,
We are interested in your wind turbine, can you please give us the current condition of the turbines, or maybe some pictures of actual turbines, thanks!
Michelle Robinson
COO
Dear Sir,
I am interested in buying one of the turbine.
Please contact me as soon as possible.
Mathieu Taffonneau
Herman J.Schellstede and Associates, Inc
Phone : 337 365 7258
Nice post, keep up the excellent work
Dear Sir,
I’m interested in buying one of the above mentioned wind turbine to use in my farm mainly for water pumping and cooling of the fruit storage hangers. I have a few question regarding this, first is the price offered negotiable ? secondly I want to use this turbine ON-grid, i.e. if the load I have in the farm is more than the generated power, I will partly buy power from the grid (the peak load I have in the summer time) and if the load is less than the generated power, then I will be able to SELL power to electricity company. My third question is regarding the generated harmonics, i.e. the wind turbine will be On-grid and in order for the Jordanian Regulatory Commission to allow the connection to the grid, I have to assure low generated harmonics to be fed to the grid with the fundamental frequency (50 Hz in Jordan). Thanks
Hamed Tarawneh
Amman, Jordan. Mobile phone:00962777053380