.

RARE OPPORTUNITY!

Quality Proven 2.5kW used wind turbine for sale! ONLY £5,000 GBP – ($7,790 USD) – Built in 2003 -

..

• 1 x Proven WT2500 – 2.5kW (50Hz) (Made in the UK) For Sale for only £5,000 GBP – ($7,790 USD) - ‘As Is’ – ‘Where Is’
  

• Turbine is still installed and can be viewed in operation
  

• Perfect for domestic use or to feed your business premises
  

• MWPS can assist in finding you installation Service
  

  .

• Turbine type: Proven WT2500
  
• Built: 2003
• Nominal Output: 2.5 kW
• Rotor diameter: 3.5 meter
• Mast Height: 6 meter
  
• Hub height: 6.5 meter
• First commissioning date: October 2003

Sale price contains:

• Complete Turbine – Tower, Generator, Blades, Hub & Controller
• Service history documentation
• Technical drawings

Additional Option to buy:

Inverter – Studer Innotec HP Compact 5048 only £750.00 GBP – ($1,200 USD)

Download Studer HP technical specification document – click here

This turbine is in perfect working order and only sold because of re-powering and upgrading to a larger turbine.

DOWNLOAD TECHNICAL SPECS SHEET:

Proven WT2500 Specs

Please contact ad owner NOW for more details

NOTES:

• Viewings at seller’s site can only be arranged if signed LOI (Letter of Intention) has been received

.

RARE OPPORTUNITY!

FURTHER PRICE REDUCTION! NOW ONLY $39,900 USD per unit – Built in year 2000 - Auction Price Offers Also Welcome!

Five units have just been sold! Don’t miss the opportunity to buy the remaining  13 units at this heavily discounted price!

.

• Only 13 units left of NedWind 46 – 500kW (50Hz) wind turbines

• Only $39,900 USD per unit – ‘As Is’

• Built in 2000 – Only just over 10 years of operation

• Full Service History

  
  

Start your own wind farm at the fraction (10%) of the cost for new turbines! Become your own Small-scale Energy Tycoon and sell electricity to the grid for a high return on investment!

.

• 13 x NedWind 46 – 500 kW (50Hz) (Made in Holland) For Sale for only $39,900 USD per unit – ‘As Is’

• Only just over 10 years old – First operation December 2000

• Already dismantled and included in the price

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full shipping and Installation Service also available

  .

• Turbine type: NedWind 46
• Built: 2000
• Nominal Output: 500 kW
• Rotor diameter: 46.1meter
• Tower Height: 46 meter (two sections of 23m each) can be stacked into each other
• Hub height:47.2 meter
• Number of turbines available: Only 13 units left
• Total combined capacity: 3 MW
• First commissioning date: December 2000

Sale price contains:

• Complete Turbine – Towers, Nacelle, Blades, Hub & Controller
• Full service history documentation
• Technical drawings for foundations including drawings for founation rings and frames etc.
• Dismantling & transport to storage facility of the local harbor area close to ship loading
• Specialized technical assistance provided by Ex Nedwind engineers during every step of transaction – to delivery to buyer’s seaport
• 100% hustle free buy – No hashes -No surprises

These turbines were in fair operating condition until the 25th Nov 2011 when they had been dismantled. Please note that these turbines had been operating in a coastal area and had been exposed to salty and wet air conditions.

NOTE: These turbines are currently configured for 50Hz operation – conversion to 60Hz grid frequency available on request (If 3 or more units purchased, conversion to 60Hz is free of charge. For 1 or 2 units purchased, conversion to 60Hz can be made for only $4,500 USD per unit

Additional Options for buyer’s peace of mind

• A basic overhaul service on every machine can be ordered and undertaken before shipment including replacement with brand new ball bearings, change of all oils and greases, full gearbox inspection and parts replacements (as required), replacement of blades where necessary and painting of tower at necessary crucial points etc. for only $19,800 USD extra
• All works undertaken by specialist Ex-NEDWIND engineers from former manufacturer now owned by Vestas
• Full shipping service available to any major seaport in the world starting from only $26,000 USD – $28,000 USD per unit if over 5 units are shipped – approx. $39,000 per unit for 4 or less units shipped
• Step Up Transformer  690V/12Kv @ 50Hz frequency can be bought also @ only $6,800 USD  per unit extra
  
• Installation at buyer’s site (excluding crane & excluding foundation) @ only $6,400 USD per unit
• Yearly basic maintenance (labour only – excl. transport, parts, materials such as oil etc.) @ only $1,500 USD per unit
• All After Care Service provided by Ex-NedWind Engineers – full technical support (24/7 – all year round) – Price to be agreed
• Any additional ‘special’ service requests by buyer can be discussed and negotiated with seller.

Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia because of low shipping costs from the Caribbean Sea

These are ‘Low-Wind’ Turbines which output 482kW @ only 12m/s wind speed and are extremely suitable for Low Wind areas and locations.

These turbines are only sold because of re-powering and upgrading of current site to 3mW machines.

THESE TURBINES ARE PRICED TO SELL QUICK AND WILL NOT LAST LONG!

DOWNLOAD TECHNICAL SPECS SHEET:

NedWind 46 specs

NedWind 46 Power curve

Packing List

• 13 x NedWind 46 – 500 kW (50Hz) (Made in Holland) For Sale for only $39,900 USD per unit – ‘As Is’

• Only just over 10 years old – First operation December 2000

• Dismantling has already been completed and is included in the price
  

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full shipping and Installation Service (by Ex-NedWind Engineers) also available

Please contact ad owner NOW for more details

NOTES:

• Viewings at seller’s site can only be arranged if signed LOI (Letter of Intention) has been received

3 x ‘As New’ – 6kW VAWT Residential Wind Turbines – Ropatec Maxi 6kW (50Hz) For Sale

-New price was £25,000 each ($40,000) – Can sell for only £10,000 ($16,100) each – ‘As is – Where Is’ -

As New – Immediately Available!

Can also be sold individually

The turbines are only two years old and had only been in operation for a total of 4 hours each as the installers constructed insufficient foundation and mounting so the turbines had to be switched off and stopped for safety issues.

The Ropatec Maxi 6 kW WindRotor is a single phase grid connected Vertcal Axis Wind Turbine which can be either ground or building mounted. These turbines come with AV Axis for roof mount installation. These turbines have sealed bearings which, according to the manufacturer Ropatec, should last between 20 and 25 years.

Technical Specification:

• Blade diameter – 4.60 metres
• Rated output (W) – 6000
• Warranty – 5 years (3 years left)
• Manufacturer – Ropatec
• Noise levels – 42dB max.
• Country of origin – Italy
• Generator type – Permanent magnet
• Governing wind speed (m/s) – 16
• Grid Frequency – 50Hz
  

SCOPE OF SUPPLY:

• WindRotor : Ropatec Maxi 6 KW turbine with AV axis for Roof mount
• Masts: Custom design
• G59 – G83 relay (certified) : Aurora 6000 G83 Certified Power-One Aurora 6000W  Inverters .Aurora Wind Inverters utilize a permanent magnet generator power curve, implemented in high-speed maximum power point tracking, to increase the amount of energy that can be harvested from small wind turbines. These power curves can be optimized, via software, to match the output of a specific wind turbine.
• Sundries : Ropatec High windspeed Brake
• Anti Vibration Mounts : Special Rooftop mounts 8 per turbine

Contact Ad owner for quick sale

Viewings can only be arranged if signed LOI (Letter of Intend) has been received.

NOTES::

• Buyer must dismantle and collect
• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below!
  
• 
  
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

Get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports.

Get a shipping quote from uShip! For collection address reference, use the town of  Leeds, UK.  Click here to get quotes!

HOW DOES uSHIP WORK?

Disclaimers: Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors 2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

1 Brand new and complete set of 1kW Hummer Wind Turbine – for Off Grid operation – 50hz.

Priced to Sell!!

This set is from a cancelled order which was shipped to Belfast, Northern Ireland and is still originally packaged. The turbine comes with manufacturers standard warranty and is immediately available – ready for collection and installation.

Includes: Wind Generator, Inverter/Controller & 8M Guyed Tower

Complete set only - €1,250 EUR – ($1,800 USD)

Warranty Incl : 2 years for generator, 1 year for all other parts.

GENERAL DATA:

NOISE INDEX: MODEL H3.1-1000W    LAeq=30 dBA 5m behind turbine@5m/s gusting

Parts and Accessories:

• Hummer wind turbine includes the body, tower plus accessories, and controlling units.
• Body includes: rotor blades, generator, yaw shaft, nose cone, tail pole, tail wing, etc.
• Tower and accessory: pole, nut, pedestal, guy wire, anchor, and cable, etc.
• controlling unit: controller ,inverter and load dumping. The generator, blades, nose cone,
• shaft, tail pole, tail wing, tower, anchor, etc are all spray-painted, galvanized and antisepticised.

Generator:

•    This generator is the most advanced in the world, which has four patents.
•    It is extremely light and small, high in efficiency–more than 0.78 of utilization ratio.

• Low in energy consumption, noise and speed-up wind speed (3m/s for 1000W).
• Swift running: hummer generator runs 1.5 – 3 times faster than other types of  generators under equal conditions due to lightness, high efficiency and low resistance.  As a result it can output more power than others.
• Swift charging: due to high efficiency and low wind start-up, the running time of hummer generator will be longer than conventional ones, and that is why it can charge batteries faster than others.

Hybrid Off-grid Controller/Inverter:

Control System:

● The power efficiency has been highly improved by using IGBT.

● With the automatic program optimization of MPPT the generator capacity is highly improved.

● LCD indicates information simultaneously.

● Real-time working power curve can be seen from the PC interface.

● Several optional communication interface includes power line carrier, RS485, wireless data transmission.

● Comprehensive protection function with highly reliability

● Wide AC voltage range

● Freely set working curve chart

● Simple, reliable and special plug connection

Rotor blade:

• Blades can typically be made of glass fiber reinforced plastic or aluminum alloy.
• The Hummer blade is designed by aerodynamic experts according to the airscrew structure and the wind power utilization ratio enhances up to 0.78.
• Most turbine blades have weak endurance through gale force type winds, they break easily in low temperature, the usable time in gale area is usually no more than 3 years, etc, Hummer has designed a new wind turbine blade, which can bear gale  force winds.
• The hummer wind blade’s successful application prolongs the entire wind turbine’s service life to 10-15 years more. With the auto-deflection tech, it operates stable-quietly and soundlessly, and also brings enormous convenience for use and replacement.

Nose cone:

• The nose cone is made of reinforced aluminum alloy.
• It’s located in front of blades to reduce the wind resistance. The generator is enclosed in the nose cone, which is favorable for heat dispersion.
• Protection cover: It is located between the blades and nose cone, and is made of reinforced aluminum alloy to further reduce the wind resistance and protect the generator.
• Yaw shaft: It is made of superior steel to integrate blades, the generator, tail pole, tail wing and tower. Inside the yaw shaft there are slip rings to prevent the cable from twisting.
• Tail pole: It is light with high intensity and made of manganese steel.
• Tail wing: It is made of stainless steel, inflexible, auto-deflection in high wind condition, reliable and sharp in speed limitation.
• Tower: It is made of carbon steel, with several sizes of outer diameter and height. They are anticorrosion, as well as UV-proof.
• Guy wires & anchors: Guy wire adopts button structure, and arrow like anchor, so it is much easier for installation
• Surface coating & protection: All the parts are static molded and then galvanized, so they are anticorrosion, UV-proof, crashworthy, fastness and will be fresh all year round.

• All the parts are made of high quality aluminum alloy and superior steel, which can be used in the temperature ranging from -45℃to 45℃, in the surroundings of high wet, sand salt or frost areas.

Contact Ad owner for quick sale

-4 units Immediately available-

Completely Remanufactured and Ready to Install

$149,000 USD per unit

-As is – Where is – Exworks owner’s site Minneasota – USA

Completely Remanufactured

When buying a remanufactured wind turbine, it is important for you to know that there is a big difference between a used/second hand, refurbished or remanufactured wind turbine. Here are the descriptions for each term:

• Used / Second Hand = “As Is” Condition
• Refurbished = Some service has been completed, but not completely remanufactured
• Remanufactured = Meets or exceeds original specification – Equipment updates are included

Start your own wind farm with totally refurbished wind farm generators. 18 x WindMatic 17S producing 1.7mW of power. These turbines are completely remanufactured above and beyond original specifications and carry a five year warranty.  Seller is able to give you a turn key solution from start to finish. Seller’s services includes site analysis, assistance with grants and tax credits, foundation, refurbishment, complete turbine installation, and commissioning. These remanufactured WindMatic 17S are quiet, efficient, affordable, and perfect for farms, businesses, schools, and residential sites. The seller can also assist in shipping.

TURBINE

• Type 3 blades, stall regulated
• Diameter 17m
• Direction of rotation Counter clockwise
• RPM 41-42/58-59 rpm
• Mass (inc1. hub) 1240kg

BLADES

• Beam material reinforced fiberglass
• Length 8,20m
• Rotor Diameter 16m

AERODYNAMIC BRAKES

• Type Spoilers
• Releasing Centrifugally

NACELLE

• Cover material Aluminium
• Chassis material Galvanised Steel
• Mass (excl. turbine) 4100kg

OPERATION BRAKE

• Type Disc Brake
• Location Turbine Shaft
• Operation Hydraulic

GEARBOX

• Type Oil lubricated, hollow shaft

GENERATORS

• Type Asynchronous with squirrel cage

YAWING SYSTEM

• Type Yaw gear wheel

• Price includes Tower and standard controller
• Completely Remanufactured above and beyond original specifications

Following tower options available:

• 100′ Lattice Tower
• 120′ Lattice Tower
• 140′ Lattice Tower
• 100′ Monopole Tower
• 115′ Monopole Tower

Please ask for quotation of above tower heights

Requires conversion prior to connection to 50hz grid !!

$149,000 USD per unit – Exworks Seller’s site – Minnesota

NOTES:

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEED A SHIPPING QUOTE FOR THESE TURBINES?

Opportunity to bid on one lot of 18 used Mitsubishi MWT-500 – 500kW/50Hz wind turbines

Amazing Offer: 18 Mitsubishi MWT-450  – 500kW (50hz) wind turbines for sale.

Minimum bid price for all 18 units is 500,000.00 EUR - bids below this price will not be considered!

This is a massive 9mW of wind turbines available at auction price!

On behalf of one of our affiliates, we would like to inform you about an unique opportunity to bid on one lot of 18 used Mitsubishi MWT-500 – 500kW/50Hz wind turbines:

• Open bid period from now until March 15, 2011.
• · Bid reviews and acceptance until March 15, 2011.
• · MWPS can place your bid on your behalf and we will confirm the receipt of your bid by e-mail.
• · Collection of the turbines shall be immediately following dismantling early May, 2011.
• · Payment conditions: 40% down payment on contract signing and 60% before collection.
• · Bids below EURO 500.000 for the total batch of 18 units will not be considered.
• · A sales commission of 10% on completion of transaction is payable to MWPS Ltd.

Location: South West Europe – Price is ExWork – ownwer’s site

Package includes the following:
• 18 pcs. Mitsubishi MWT-450 with 40 meter hub-height tubular towers from 1998;
• 20 pcs. 630 kVA transformer stations 550V/15kV including cos phi compensation (est. value €150.000 EUR – $202,327 USD)

• full set of spare parts and documentation (est. value €150.000 EUR – $202,327 USD);
• full set of manufacturers technical documentation;

All 18 turbines have been inspected recently by Germanischer Lloyd Garrad Hassan very recently.
Recent MWT-450 Inspection Reports available – Service history available

Please note that these turbines are configured for 50hz and not suitable for operation on 60hz grid frequency.

• Rated Output – 500kW
• 550V – 50hz
• Cut in – 4.5m/sec
• Rated – 12m/sec
• Cut out – 24m/sec
• Number of blades – 3
• Rotor diameter – 41m
• Hub Height – 40m

DOWNLOAD TECHNICAL DOCUMENTS:

Mitsubishi MWT-450 outline drawing.pdf

Mitsubishi MWT-450 tower drawing.pdf

Amazing Offer: 18 Mitsubishi MWT-500  – 500kW wind turbines for sale.

Complete package price for all 18 units – Minimum bid 500,000 EUR

Immediately Available.  Can ship anywhere in the world!

Bid Request closes 15th March 2011

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves.

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

For immediate Sale – Very good conditioned BONUS 600 Mk IV – 600kW (50hz) wind turbines available now!

Can ship anywhere in the world

Offers Welcome!!!!

-As is – Where is – Excluding dismantling

This very good conditioned Turbine was was in operation until 31st December 2010 when the permit expired. Turbine is still mounted, can be viewed as is and is ready to dismantle and for transport asap.

BONUS 600 Mk IV – 600kW (50z)

• Model: Bonus 600 kW Mk IV
• Tower: 50 m steel tower
• Rotor: 44 m
• No sections: 2
• Flender Gearbox – new in 2003 -
• ABB Generator – M2BG 400 XL 4/6 B3
• Start of first operation: Feb 1998
• Includes 10 kV transformer – 690 V/10 kV. 50 Hz.
• Customer to dismantle (dismantling by 3rd party costs approx. 7.5k – 10k EUR)
• Turbine was permanently shut down Dec 31st 2010 due to the permit has expired. Turbine is still
  mounted and ready for transport asap.
• Full Service history available
• Service has been scheduled and performed according to manufacturers recommendations.
• Service reports and invoices are available

This wind turbine comes complete for 50hz on-grid operation.

Don’t miss this amazing offer!

This is a great opportunity for any buyer to start a new wind farm project for a fraction (15%) of the price of a new turbine of this size. This turbine has a life span of another 15 years if serviced and maintained regularly.

Transformer Station is included in te price!

DOWNLOAD TECHNICAL SPECIFICATIONS:

Bonus 600 Mk4 600kW Wind Turbine Technical Specifications.pdf

For immediate Sale – Very good conditioned BONUS 600 Mk IV – 600kW (50hz) wind turbines available now!

Can ship anywhere in the world

OFFERS WELCOME!!!!

-As is – Where is – Excluding dismantling

Contact Ad owner for quick sale

Note: Buyer must dismantle and collect. Seller may assist in arranging shipping but do not ask for shipping quotes. Shipping quote must be provided by forwarder!

• Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

  
  
• NOTE: This is a 50z units and not suitable for operation on 60z grid. Time wasters and tire kickers will not be accommodated!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors

2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

5 years warranty!

The WestWind Pioneer 25kW wind turbine is ideal for residential, commercial,  industrial, agricultural and muncipality use.

Can ship anywhere in the world.

Only$149,000 USD per unit! FOB manufacturers location – Kansas – USA

This turbine normally retails at $225.000

Technical Specifications

• Up wind Active Yaw System
• Generator
• Rated Power:  25Kw
• Type:  3 phase, 60 Hz synchronous 240v or 480v AC
• RPM:  1800 (3 phase)
• Optional: 240v single phase
• Optional: 50 Hz (voltage set per country standard)

Mono-pole Tower

• Construction material; steel plate
• Height 80 ft (standard), (Optional) 100ft, 120ft, 150ft
• Hub height:  84 ft
• White powder coated
• Nacelle access:  exterior tower ladder with Cat Walk
• Base Diameter:  54 inches
• Control Panel located outside bottom of tower

Rotor

• Orientation:  Upwind
• 16 foot
• 3 blades, fixed pitch
• 33.5 ft diameter
• RPM  100
• Noise less than 68 decibels at tower
• Blades Fiberglass
• Weight – approx. 75 lbs each
• Area swept:  75 Square meters

Component Weights

• Nacelle, rotor and blades 3,450 lbs
• Tower (2 sections):  7,100

Operational

• Cut in speed: 8 mph
• Cut off speed: None (stall regulated blades)
• Survival wind speed:  120 mph

Other

• Touch screen control panel
• User configurable control parameters
• Soft Start for generator
• Ultra Sonic Wind Vane / Anemometer
• Slip-ring
• Fiberglass nacelle cover / nose cone

Options

• Internet Accessibility
• Heated wind vane
• Transmission heater
• Noise dampening foam installed
• Single phase converter
• Safety Features
• Induction generator anti-Islanding
• Fail safe hydraulic disk brake
• Blade over speed centrifugal actuated tip brakes
• Thermal protection on generator
• Thermal protection on yaw controls
• Vibration sensor for fault shutdown
• Voltage and Frequency protection

5 years warranty!

10 year extended warranty optional – please ask for quote

Can be delivered for either 60hz or 50hz grid-frequency

Contact Ad owner for quick sale

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

One is currently in operation in the US following a complete rebuild in 2007.

The 2nd turbine rebuild will be complete May 15, 2010.

A decommissioning fee of $500 will apply for each turbine and includes loading onto truck on site

Each set include:

• 80 ft tilting tower
• gin pole
• guy wires
• related hardware

One of the most successful designs from the mid 1980s – 2 blade, downwind with conical stabilizer. Rated 25 KW at 27 mph wind. Composite blades, stall regulated w/flyball back up.

These 2 turbines have had regular service since installed in 1985 and operated successfully in sub zero conditions. Towers have two 40 ft sections and are sleeved and galvanized. They they can be transported via truck or trailer. Price does not include dismantling – reason for selling…installing a larger turbine. Would like to sell the 2 as a pair = 50 KW.

TECHNICAL SPECIFICATION:

• - 32ft rotor
• - composite blades NASA airfoil – twisted tapered design – aerodynamic stall
• - 120 rpm rotor speed – tetering hub
• - flyball overspeed control as back up to elelctric brake
• - rated 25 KW at 26 MPH wind
• - tower is tapered galvanized steel – 2 pc sleeve
• - tower is 4 way guyed includes gin pole and related guy wires and hardware
• - foundaiton plans available on deposit
• - induction generator – single phase

DOWNLOAD FULL TECHNICAL SPECIFICATIONS:

carter 25kw technical specifications.doc

For further information use the ‘contact ad owner box’

New Price! Reduced to sell, now only $6500.00 USD

This used wind turbine for sale is from 1983 and has only produced 5830kWh. Currently installed in Minnesota – USA and grid-tied. This machine was made for 110V AC utility connected. The turbine was not a very well sited installation. It comes with a 60′ Rohn SSV lattice tower which is in very good condition.

Technical Specification:

Make: Enertech Corporation
Model: Thunderbird 4000
Blades: 3
Diameter: 17.9ft
Volts: 220AC
Cut in speed: 8mph
Rated output: 4kW
Max. O/P: 4.7kW
Speed: Stall

The System comes with Grid-Tie controllers. Blades in need of replacing – otherwise parts are complete with exception of 1 tip brake – all original.

Turbine can be broken down to into 3 x 20′ sections or further if necessary -

Dismantling to be arranged by buyer. Price including dismantling and loaded onto truck, please add $1,200.00