.

RARE OPPORTUNITY!

Quality Proven 2.5kW used wind turbine for sale! ONLY £5,000 GBP – ($7,790 USD) – Built in 2003 -

..

• 1 x Proven WT2500 – 2.5kW (50Hz) (Made in the UK) For Sale for only £5,000 GBP – ($7,790 USD) - ‘As Is’ – ‘Where Is’
  

• Turbine is still installed and can be viewed in operation
  

• Perfect for domestic use or to feed your business premises
  

• MWPS can assist in finding you installation Service
  

  .

• Turbine type: Proven WT2500
  
• Built: 2003
• Nominal Output: 2.5 kW
• Rotor diameter: 3.5 meter
• Mast Height: 6 meter
  
• Hub height: 6.5 meter
• First commissioning date: October 2003

Sale price contains:

• Complete Turbine – Tower, Generator, Blades, Hub & Controller
• Service history documentation
• Technical drawings

Additional Option to buy:

Inverter – Studer Innotec HP Compact 5048 only £750.00 GBP – ($1,200 USD)

Download Studer HP technical specification document – click here

This turbine is in perfect working order and only sold because of re-powering and upgrading to a larger turbine.

DOWNLOAD TECHNICAL SPECS SHEET:

Proven WT2500 Specs

Please contact ad owner NOW for more details

NOTES:

• Viewings at seller’s site can only be arranged if signed LOI (Letter of Intention) has been received

1 Brand new and complete set of 1kW Hummer Wind Turbine – for Off Grid operation – 50hz.

Priced to Sell!!

This set is from a cancelled order which was shipped to Belfast, Northern Ireland and is still originally packaged. The turbine comes with manufacturers standard warranty and is immediately available – ready for collection and installation.

Includes: Wind Generator, Inverter/Controller & 8M Guyed Tower

Complete set only - €1,250 EUR – ($1,800 USD)

Warranty Incl : 2 years for generator, 1 year for all other parts.

GENERAL DATA:

NOISE INDEX: MODEL H3.1-1000W    LAeq=30 dBA 5m behind turbine@5m/s gusting

Parts and Accessories:

• Hummer wind turbine includes the body, tower plus accessories, and controlling units.
• Body includes: rotor blades, generator, yaw shaft, nose cone, tail pole, tail wing, etc.
• Tower and accessory: pole, nut, pedestal, guy wire, anchor, and cable, etc.
• controlling unit: controller ,inverter and load dumping. The generator, blades, nose cone,
• shaft, tail pole, tail wing, tower, anchor, etc are all spray-painted, galvanized and antisepticised.

Generator:

•    This generator is the most advanced in the world, which has four patents.
•    It is extremely light and small, high in efficiency–more than 0.78 of utilization ratio.

• Low in energy consumption, noise and speed-up wind speed (3m/s for 1000W).
• Swift running: hummer generator runs 1.5 – 3 times faster than other types of  generators under equal conditions due to lightness, high efficiency and low resistance.  As a result it can output more power than others.
• Swift charging: due to high efficiency and low wind start-up, the running time of hummer generator will be longer than conventional ones, and that is why it can charge batteries faster than others.

Hybrid Off-grid Controller/Inverter:

Control System:

● The power efficiency has been highly improved by using IGBT.

● With the automatic program optimization of MPPT the generator capacity is highly improved.

● LCD indicates information simultaneously.

● Real-time working power curve can be seen from the PC interface.

● Several optional communication interface includes power line carrier, RS485, wireless data transmission.

● Comprehensive protection function with highly reliability

● Wide AC voltage range

● Freely set working curve chart

● Simple, reliable and special plug connection

Rotor blade:

• Blades can typically be made of glass fiber reinforced plastic or aluminum alloy.
• The Hummer blade is designed by aerodynamic experts according to the airscrew structure and the wind power utilization ratio enhances up to 0.78.
• Most turbine blades have weak endurance through gale force type winds, they break easily in low temperature, the usable time in gale area is usually no more than 3 years, etc, Hummer has designed a new wind turbine blade, which can bear gale  force winds.
• The hummer wind blade’s successful application prolongs the entire wind turbine’s service life to 10-15 years more. With the auto-deflection tech, it operates stable-quietly and soundlessly, and also brings enormous convenience for use and replacement.

Nose cone:

• The nose cone is made of reinforced aluminum alloy.
• It’s located in front of blades to reduce the wind resistance. The generator is enclosed in the nose cone, which is favorable for heat dispersion.
• Protection cover: It is located between the blades and nose cone, and is made of reinforced aluminum alloy to further reduce the wind resistance and protect the generator.
• Yaw shaft: It is made of superior steel to integrate blades, the generator, tail pole, tail wing and tower. Inside the yaw shaft there are slip rings to prevent the cable from twisting.
• Tail pole: It is light with high intensity and made of manganese steel.
• Tail wing: It is made of stainless steel, inflexible, auto-deflection in high wind condition, reliable and sharp in speed limitation.
• Tower: It is made of carbon steel, with several sizes of outer diameter and height. They are anticorrosion, as well as UV-proof.
• Guy wires & anchors: Guy wire adopts button structure, and arrow like anchor, so it is much easier for installation
• Surface coating & protection: All the parts are static molded and then galvanized, so they are anticorrosion, UV-proof, crashworthy, fastness and will be fresh all year round.

• All the parts are made of high quality aluminum alloy and superior steel, which can be used in the temperature ranging from -45℃to 45℃, in the surroundings of high wet, sand salt or frost areas.

Contact Ad owner for quick sale

Opportunity to bid on one lot of 18 used Mitsubishi MWT-500 – 500kW/50Hz wind turbines

Amazing Offer: 18 Mitsubishi MWT-450  – 500kW (50hz) wind turbines for sale.

Minimum bid price for all 18 units is 500,000.00 EUR - bids below this price will not be considered!

This is a massive 9mW of wind turbines available at auction price!

On behalf of one of our affiliates, we would like to inform you about an unique opportunity to bid on one lot of 18 used Mitsubishi MWT-500 – 500kW/50Hz wind turbines:

• Open bid period from now until March 15, 2011.
• · Bid reviews and acceptance until March 15, 2011.
• · MWPS can place your bid on your behalf and we will confirm the receipt of your bid by e-mail.
• · Collection of the turbines shall be immediately following dismantling early May, 2011.
• · Payment conditions: 40% down payment on contract signing and 60% before collection.
• · Bids below EURO 500.000 for the total batch of 18 units will not be considered.
• · A sales commission of 10% on completion of transaction is payable to MWPS Ltd.

Location: South West Europe – Price is ExWork – ownwer’s site

Package includes the following:
• 18 pcs. Mitsubishi MWT-450 with 40 meter hub-height tubular towers from 1998;
• 20 pcs. 630 kVA transformer stations 550V/15kV including cos phi compensation (est. value €150.000 EUR – $202,327 USD)

• full set of spare parts and documentation (est. value €150.000 EUR – $202,327 USD);
• full set of manufacturers technical documentation;

All 18 turbines have been inspected recently by Germanischer Lloyd Garrad Hassan very recently.
Recent MWT-450 Inspection Reports available – Service history available

Please note that these turbines are configured for 50hz and not suitable for operation on 60hz grid frequency.

• Rated Output – 500kW
• 550V – 50hz
• Cut in – 4.5m/sec
• Rated – 12m/sec
• Cut out – 24m/sec
• Number of blades – 3
• Rotor diameter – 41m
• Hub Height – 40m

DOWNLOAD TECHNICAL DOCUMENTS:

Mitsubishi MWT-450 outline drawing.pdf

Mitsubishi MWT-450 tower drawing.pdf

Amazing Offer: 18 Mitsubishi MWT-500  – 500kW wind turbines for sale.

Complete package price for all 18 units – Minimum bid 500,000 EUR

Immediately Available.  Can ship anywhere in the world!

Bid Request closes 15th March 2011

Contact Ad owner for quick sale

Note: Please do not ask for shipping quotes or CIF prices. Shipping must be arranged by buyer themselves.

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

For immediate Sale – Very good conditioned BONUS 600 Mk IV – 600kW (50hz) wind turbines available now!

Can ship anywhere in the world

Offers Welcome!!!!

-As is – Where is – Excluding dismantling

This very good conditioned Turbine was was in operation until 31st December 2010 when the permit expired. Turbine is still mounted, can be viewed as is and is ready to dismantle and for transport asap.

BONUS 600 Mk IV – 600kW (50z)

• Model: Bonus 600 kW Mk IV
• Tower: 50 m steel tower
• Rotor: 44 m
• No sections: 2
• Flender Gearbox – new in 2003 -
• ABB Generator – M2BG 400 XL 4/6 B3
• Start of first operation: Feb 1998
• Includes 10 kV transformer – 690 V/10 kV. 50 Hz.
• Customer to dismantle (dismantling by 3rd party costs approx. 7.5k – 10k EUR)
• Turbine was permanently shut down Dec 31st 2010 due to the permit has expired. Turbine is still
  mounted and ready for transport asap.
• Full Service history available
• Service has been scheduled and performed according to manufacturers recommendations.
• Service reports and invoices are available

This wind turbine comes complete for 50hz on-grid operation.

Don’t miss this amazing offer!

This is a great opportunity for any buyer to start a new wind farm project for a fraction (15%) of the price of a new turbine of this size. This turbine has a life span of another 15 years if serviced and maintained regularly.

Transformer Station is included in te price!

DOWNLOAD TECHNICAL SPECIFICATIONS:

Bonus 600 Mk4 600kW Wind Turbine Technical Specifications.pdf

For immediate Sale – Very good conditioned BONUS 600 Mk IV – 600kW (50hz) wind turbines available now!

Can ship anywhere in the world

OFFERS WELCOME!!!!

-As is – Where is – Excluding dismantling

Contact Ad owner for quick sale

Note: Buyer must dismantle and collect. Seller may assist in arranging shipping but do not ask for shipping quotes. Shipping quote must be provided by forwarder!

• Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

  
  
• NOTE: This is a 50z units and not suitable for operation on 60z grid. Time wasters and tire kickers will not be accommodated!

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors

2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!

to it, it will start turning in as little as 3-4 mph winds. I consider 20 mph winds to be perfect and 25-30 mph winds to be about maximum.

Some new motors are tighter (until broken in) and will require more wind to begin turning.

What can you use this turbine for? Well let me give you a few ideas.

1. Under good conditions (20+ mph winds) this unit will put out around 30 watts of power at around 13 volts. This will slowly trickle charge a 12 volt

battery. Just connect it to your battery red-red, black-black and it will work. No charge controller is needed.

2. If it’s turning at all (4-5 mph winds) it will charge any of your AAA, AA, C or D rechargable batterys. You’ll need to make a simple connector (not

included) and you’ve got hot batterys for your camera, Ipod, etc. anywhere you go. Hikers, hunters, boaters, etc. can really appreciate this.

3. I get emails almost every day from folks that want a real small wind turbine to power a small dc light bulb when it’s turning. They just want to see

a light burning when they look out the window at night or while sitting on the porch in the evenings. This unit will do that also. If it’s turning it will

light the bulb (not included) and it gets brighter as wind speed increases.

4. This unit is perfect for your childs school project or your own alternative energy project.

Here’s a detailed description of the item:

The unit is small, about 21″ long from the tip of the arbor to the end of the tailfin.
It comes with a blocking diode installed so as not to discharge your battery when the wind isn’t turning.

The main beam (frame) is made of 3/4″ steel square tubing and painted black. Plastic plugs are used to cap the ends of the turbing.
The downtube (the part that slips into your mounting pole, etc.) is 7/8″ o.d. steel and is welded to the main beam.
The tail fin (which keeps it pointed into the wind) is made of inexpensive white plastic and is bolted to the main beam.
The generator motor is solidly clamped to the main beam with a pair of steel bands.

The motor cover is made of pvc plastic and painted.Style and colors my vary.
Three blades come with the unit. They are made from thinwall pvc plastic pipe and were especially designed for low startup speeds.

The blades are about 17″ long each making the prop disc about 34″ across.
The arbor which connects the motor and prop hub is machined from 6061 T-6 aluminum.
The prop hub is made from 3/16″ ABS plastic and is light and strong.

The unit comes 95% assembled and any 12 year old can bolt on the tail fin, hub and blades in less than 10 minutes.

2000 Watt (2KW) Wind Turbine (OFF-GRID)

Includes: Wind Generator, Inverter/Controller & 10M Guyed Tower

2Kw Hummer Wind Turbine

*Please note: Batteries are NOT included.

Complete system SPECIAL OFFER: US $4,765.00

Regular Retail Price US $5,292.00

Power Data 2000W

Rated Output (W)- 2000
Max output 3500
Charge Voltage(V) DC 120V
Numbers of blade 3
Blade material GRP
Blade diameter (m) 3.8
Start up wind speed (m/s) 3.0
Rated wind speed (m/s) 9.0
Rated rotate speed (r/min) 450
Wind Utilize Ratio (Cp) 0.45
Generator Efficiency >0.78
Pole Diameter(mm) Ф120
Tower Height (m) 10

Warranty Incl : 2 years for generator, 1 year for all other parts
*Can add up to 1000 watts of solar panels to this wind-solar hybrid system
*Optional 1 Year Extended Warranty (on generator) – $185.56 USD

2Kw Hummer Inverter/Controller

Individual Component Prices (Off-grid)

Generator – $2635.00 USD
Hybrid Controller / Inverter – $1408.48 USD
10M Guy Tower – $1047.93 USD
10M Free Standing Tower – $3258.90 USD

2 Kw Hummer Power Curve

On-grid Prices:

Complete System – Reg. $7289.00 USD, On Sale $6562.00 USD
Generator – $2635.00 USD
Grid-tie Inverter – $4095.25 USD
10M Guy Tower – $1047.93 USD
10M Free Standing Tower – $3258.90

Optional CSA Approved Inverter and Rectifier available:

Aurora Inverter

The Aurora inverter ($4095.25 USD) is intended for direct grid-connect, without batteries. It is UL/CSA listed, and thus approved by your power company for use. The PVI-WIND-INTERFACE is $795.00 USD.For further information please contact ad owner

Off-Grid Complete System Available For $143,945.00 USD

• Includes: 50KW Generator, 50KW Grid-tie Controller, 25M Free Standing Tower, Grid-tie Inverter & Blades)

• Volume Discounts available: Qty 10 (3%), Qty 20 (5%), Qty 50 (10%) & Qty 100 (15%)

SAIP AH-50KW Wind Turbine

Specifications:

50KW wind turbine generator

Power: 50kw
Blade diameter: 18m
Rated Rotated speed: 80
Rated wind speed: 11 m/s
Rated power: 50kw
Max power: 55kw
Output voltage: 380v
Start up wind speed: 3.5m/s
Operating wind speed: 3-25m/s
(Security wind speed):50m/s
Height of tower: 25m
Weight of top section: 2050kg
Tower pole type: 800steel tube*10mm

Output control system: Charge controller inverter
Blades: Fibre glass
Capacity and quantity of battery: 12V 200AH

50KW On-Grid Controller

The SAIP AH-50KW can supply power for:

Village using air conditioning, refrigerators, washers, water pumps, electric rice-cookers, color televisions, illuminations, electric fans and other charges

SAIP 50KW Power Curve

Please contact us to place your order & to make shipping arrangements. Direct shipping to your door is based on weight & destination.

You can place your order for this item either by phone at +44(0)7962 420898 or by email through the Contact Ad Owner form.

Shipping Options (Canada):

(1)Ship Direct – Shipped direct to your door.
(2)Dock Pick-up – Pick up at your nearest sea port dock FOR FREE! (Direct from MFR)
(3)Custom Quote by email based on total weight of shipment & your location. Contact Us  by using Contact Ad Owner

Shipping Options (US):

(1)Custom Quote by email based on total weight of shipment & your location. Contact Us  by using Contact Ad Owner

Includes: Generator, Blades, Hub, Tail, Controller, Off-Grid Sine Wave Inverter & 6M Guy Tower.

Individual Component Prices:

Generator, Blades, Hub & Tail – $1,110.87 USD
Controller & Inverter – $286.95 USD
6M Guy Tower – $368.07 USD

Specifications:

General Data:

Protection Level – IP54
Insulation Level – B
Cooling Mode – IC0041
Drive Mode – Direct driven by wheel
Adjust SpeedMethod – Automatic
Adjust Direction Method- Automatic
Executive standards – CE certificate
Temperature: -40~+60 Celsius degree
Humidity: less than 95%

Generator Specs:

Model – 500W
Rated power( W) – 500
Rated voltage( DCV) – 24
Rated voltage( ACV) – 17
Rated current( DCA) – 21
Rated current( ACA) – 27
Magnetic pole count – 10
Rated speed( rpm) – 400
Max speed( rpm) – 500

Blades:

Material of blades – Fiber glass
Number of blades – 3
Diameter ( m) – 2.5
Area( m2) – 4.90
TSR – 7

Off-Grid Controller:

Model – 500W
Dump loader power( W) – 500 Watts
Batteries rated voltage( V) – 24V
Float charge voltage( V) – 30V
Overvoltage( V) – 30V
Over charge resume voltage( V) – 28V
Undervoltage( V) – 21
Under charge resume voltage( V) – 24V
Net weight( kg) – 2 KG
Working – Continuous and Intelligent
Temperature: -10~40 Celsius degree
Humidity: less than 85%

Sine Wave Inverter:

Output:

Wave model – sine wave，THD65%
Noise – 50db
Protection – limited output when over load over load/short circuit protection
Inhibiting capacity of off- communication reaching FCCA
Indicator light – inverter under normal state(green light), low voltage of battery(red light),
Over load(red light), breakdown(red light).
Alarm – alarm once per 4 seconds when main is cut down
Alarm once per second when battery is almost empty
Continuing alarm when breakdown or running out of battery
Computer interface – 9PinD Type connector(Option)
Environment: temperature – 0~40℃
Humidity – reaching 95% if not freezing
Size (W×H×Dmm)- 560×280×365
Input device – Power line

Remark; All inverters can be set as AC110V/120V/220V/230V single phase and 50Hz/60Hz output, but only 5kw, 10kw, 20kw have AC380V, three phases output.

Guy Cable Tower:

Height – 6 Meters
Diameter – 89 mm
Thickness – 3.25 mm
Sections – 2
Weight( kg) – 41.8 KG

Manufactured by: Yangzhou Shenzhou Wind-Driven Generator Co.,Ltd

Complete System Includes: Generator, Blades, Hub, Tail, Controller, Inverter, Off-Grid Modified Sine Wave Inverter & 6M Guy Cable Tower

Specifications:

General Data:

Protection – Level IP54
Insulation – Level B
Cooling Mode – IC0041
Drive Mode – Direct driven by wheel
Adjust SpeedMethod – Automatic
Adjust Direction Method under 2000W Models – Automatic

Generator Specs:

Model – AEOLUS300
Rated power( W) – 300
Rated voltage( DCV) – 12/24
Rated voltage( ACV) – 8/17
Rated current( DCA) – 25/12
Rated current( ACA) – 35/17
Magnetic pole count – 8
Rated speed( rpm) – 450
Max speed( rpm) – 600
Weight( kg) – 12.5

Blades:

Model – Aeolus 300
Material of blades – Carbon fiber
Number of blades – 3
Diameter ( m) – 1.5
Area( m2) – 1.80
TSR – 3

Off-Grid Controller:

Model – Aeolus 300
Dump loader power( W) – 300
Batteries rated voltage( V) – 12/24
Float charge voltage( V) – 15/30
Overvoltage( V) – 15/30
Over charge resume voltage( V) – 14/28
Undervoltage( V) – 10.5/21
Under charge resume voltage( V) – 12/24
Working – Continuous and intelligent
Circumstance – Temperature: -10~40 Celsius degree

Humidity: less than 85%

Remark: Inverter can be set as AC110V/120V/220V/230V single phase and 50Hz/60Hz output – No AC380V, three phases output.

Guy Cable Tower:

Model – Aeolus 300
Height( m) – 6
Diameter ( mm) – 48
Thickness – 2.5
Sections – 3 (2 meter sections)
Weight( kg) – 23.5

Shipping Options (Canada):

In-store Pick-up – No shipping charges.

Ship Direct – Shipped direct to your door.

Dock Pick-up – Pick up at your nearest sea port dock FOR FREE! (Direct from MFR)

Custom Quote by email based on total weight of shipment & your location. Contact Us by email.

Shipping Options (US):

Ship Direct – Shipped direct to your door.

Custom Quote by email based on total weight of shipment & your location. Contact Us by email