Built in 1998 – available October 2012 – 197 ft – (60m) tower height – 150ft (46m) rotor diameter

ONLY $40,000 USD per unit – excluding dismantling

Full Service history available.

• 2 x Tacke TW600e CWM 600kW (60Hz) -  (Made in Germany) – Terms – ‘ExWorks’ seller’s site

• Towers come in 3 sections – easy and cheap to transport!
• Transformers included in sales price -  60 Hz / 750 kva

• Can be viewed still erected – Dismantling scheduled for October 2012 – Buyer must dismantle – Seller can assist in arranging dismatling
  

• Perfect for investors from USA or South America or any other country with 60Hz grid
  

• Full Service History available

• Total output produced to date only 12,500,000 kwH (unit 1) and 14,100,000 kwH (unit 2)
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Tacke TW600e CWM 600kW (60Hz)
  

• Built: 1998
  
• Nominal Output: 600 kW (60Hz)
  
• Rotor diameter: 150 ft (46m)
  
• Tower Height: 197 ft – (60m)
• Number of turbines available: 2
  

Sale price contains:

• Complete Turbine – Tower, Nacelle, Blades, Hub, Controller & Transformers
  
• Tranformers (60Hz – 750kvA)
  
• Technical drawings for foundations including drawings for foundation rings and frames etc.
• Excluding dismantling. Buyer must dismantle. Seller can assist in arranging dismantling
  

NOTE: These turbines are configured for 60Hz operation

Perfect for investors from USA, South America or any other country with 60Hz grid

Please contact add owner NOW for more details

NOTES:

• These turbines are priced to sell quick
  

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEED A SHIPPING QUOTE FOR THESE TURBINES?

Built in 1994 – available Juni/July 2012 – 50m hub height – 43m rotor diameter

ONLY €29,800 EUR – ($38,800 USD) per unit – excluding dismantling

Full Service history available.

• 3 x Tacke TW600 – 600kW (50Hz) (Made in Germany) – Terms – ‘ExWorks’ seller’s site

• Towers come in 3 sections – easy and cheap to transport!
  

• Can be viewed still erected – Dismantling scheduled for June/Julyl 2012 – Seller can dismantle at extra cost to buyer for approx. 12,000 EUR
  

• Perfect for investors from South America, Eastern Europe and Asia
  

• Full Service History available

• All three turbines had a set of new Rotorblades fitted in 2006 – One unit had a new generator and clutch in 2007

• These turbines had been operating in a low wind speed and mild climate area, hence the mint condition these are in

• Total output produced to date only 15,000,000 kwH each
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Tacke TW600 – 600kW (50Hz)
  

• Built: 1994
  
• Nominal Output: 600 kW (50Hz)
  
• Rotor diameter: 43m
  
• Tower Height: 50m hub height
• Generator: AEG
• Gearbox: Renk
  
• Number of turbines available: 3
  

Sale price contains:

• Complete Turbine – Tower, Nacelle, Blades, Hub & Controller
• Tranformers (690V – 20kvA) not included – can be sold seperatly for 4,500 EUR per unit
  
• Technical drawings for foundations including drawings for foundation rings and frames etc.
• Excluding dismantling. Seller can arrange dismantling for 12,000 EUR per unit
  

NOTE: These turbines are configured for 50Hz operation

Perfect for investors from South America, Eastern Europe and Asia

Please contact add owner NOW for more details

NOTES:

• Priced to sell quick
  

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEED A SHIPPING QUOTE FOR THESE TURBINES?

One very good conditioned Südwind N 3127 – 270kW (50Hz) for sale

ONLY €39,000 EUR  - ($50,700 USD) – Built in 1993 – 40m tower – 31m rotor diameter

Full Service history available.

New reconditioned generator in 2003 and new reconditioned gearbox from 2007 fitted in 2011 – Now priced to sell quick!

• Südwind N 3127 – 270kW (50Hz)  (Made in Germany) For Sale for only €39,000 EUR - ($50,700 USD)  - ‘ExWorks’ seller’s site

• Still in operation  - Can be viewed fully operating – Price excluding dismantling
  

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full Service History available

• This wind turbine has been in operation in a very low wind speed area and very mild inland climate

• Buyer must dismantle. Seller can assist in arranging dismantling.
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Südwind N 3127
  

• Built: End 1993
• Nominal Output: 270 kW
• Rotor diameter: 31meter
• Tower Height: 40 meter (three sections)
  
• Number of turbines available: 1
• First commissioning date: End 1993

Sale price contains:

• Complete Turbine – Towers, Nacelle, Blades, Hub & Controller
• Full service history documentation
• Technical drawings for foundations including drawings for founation rings and frames etc.

This turbine is still in operation and can be inspected fully operating. Please note that this turbine has been operating in a very low wind speed area and in an inland mild climate area.

NOTE: This turbine is currently configured for 50Hz operation – conversion to 60Hz grid frequency is required for connection to 60Hz grids.

Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

THIS WIND TURBINE ARE PRICED TO SELL QUICK AND WILL NOT LAST LONG!

Please contact ad owner NOW for more details

NOTES:

• Price is without dismantling & shipping. Seller can assist with best dismantling and shipping offer.

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!
• Purchase is subject to 7% sales commission at close of sale!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

One used Enertech 60/44 – 50kW (60Hz) Wind Turbine For Sale

Built in 1985 – reconditioned in 2005 – new refurbished 60kW generator fitted in 2009

120ft tower – 41 ft rotor diameter

Only Serious Offers Considered

• 1 x Enertech 60/44 – 60kW (60Hz) (Made in USA) – Terms – ‘ExWorks’ seller’s site
  

• Already dismantled

• Perfect for investors from USA or South America

• Service History available

TECHNICAL SPECIFICATIONS:

• Turbine type: Enertech 60/44 – 60kW (60Hz)
  

• Built: 1985 – reconditioned in 2005
  
• Nominal Output: 60 kW
• Rotor diameter: 41 ft
  
• Tower Height: 120 ft – lattice – 6 sections
  
• Number of turbines available: 1
  

Sale price contains:

• Complete Turbine – Tower, Nacelle, Blades, Hub & Controller
• Tranformer not included
  
• Technical drawings for foundations including drawings for founation rings and frames etc.

Turbine comes on 120 Foot-3 legged latice tower. **5×5 building-insulated, shingled roof and sided which houses the computerized control panel and compressor. System upgrades: computerized free-wheeling and air brakes system installed in 2009

NOTE: This turbine is configured for 60Hz operation

Perfect for investors from USA or South America

Please contact add owner NOW for more details – Use contact box on the top right, next to the Google map tab!

NOTES:

• Only Serious offers considered!
  

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!
• Purchase is subject to 7% sales commission at close of sale!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

One fair/good conditioned Micon M530 250kW (50Hz) Wind Turbine for sale

ONLY €35,000 EUR  -  Built in 1993 – 31m tower – 28m rotor diameter

Full Service history available.

• Micon M530 – 250kW (50Hz) (Made in Denmark) For Sale for only €35,000 EUR  – ‘ExWorks’ seller’s site

• Allready dismantled
  

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full Service History available

• Buyer must collect. Seller can assist in arranging loading & shipping.
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Micon M530
  

• Built: 1993
• Nominal Output: 250 kW
• Rotor diameter: 28meter
• Tower Height: 30 meter (two sections)
  
• Number of turbines available: 1
• First commissioning date: 1993

Sale price contains:

• Complete Turbine – Towers, Nacelle, Blades, Hub, Transformer with housing cabinett & Controller plus Foundation plates 24 pieces (original) set
• Full service history documentation
• Technical drawings for foundations including drawings for founation rings and frames etc.

This turbine is already dismantled.

TECHNICAL SPECIFICATIONS:

Download PDF click here!

NOTE: This turbine is currently configured for 50Hz operation – conversion to 60Hz grid frequency is required for connection to 60Hz grids.

Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

THIS WIND TURBINE IS PRICED TO SELL QUICK AND WILL NOT LAST LONG!

Please contact ad owner NOW for more details

NOTES:

• Price is without dismantling & shipping. Seller can assist with best dismantling and shipping offer.

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

One good conditioned Enercon E32/33 – 330kW (50Hz) for sale

ONLY €89,000 EUR  - ($116,500 USD) – Built in 1993 – 31m tower – 33m rotor diameter

Full Service history available.

 Pictures for Illustration only!

• Enercon E32/33 – 330kW (50Hz) (Made in Germany) For Sale for only €89,000 EUR  - ($116,500 USD)  - ‘ExWorks’ seller’s site

• Still in operation  - Can be viewed fully operating – Price excluding dismantling
  

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full Service History available

• Buyer must dismantle. Seller can assist in arranging dismantling.
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Enercon E32/33
  

• Built: 1993
• Nominal Output: 330 kW
• Rotor diameter: 33meter
• Tower Height: 31 meter (two sections)
  
• Number of turbines available: 1
• First commissioning date: 1993

Sale price contains:

• Complete Turbine – Towers, Nacelle, Blades, Hub & Controller
• Full service history documentation
• Technical drawings for foundations including drawings for founation rings and frames etc.

This turbine is still in operation and can be inspected fully operating.

NOTE: This turbine is currently configured for 50Hz operation – conversion to 60Hz grid frequency is required for connection to 60Hz grids.

Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

THIS WIND TURBINE ARE PRICED TO SELL QUICK AND WILL NOT LAST LONG!

Please contact ad owner NOW for more details

NOTES:

• Price is without dismantling & shipping. Seller can assist with best dismantling and shipping offer.

• Please do not request a shipping quote from us!
  

• The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
  
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
  
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!
• Purchase is subject to 7% sales commission at close of sale!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

– 10 used WindMaster TurboWind T200- 200kW (50hz) wind turbines available now!

Can be fully refurbished – Can ship anywhere in the world HEAVILY REDUCED !!!!

• Only €15,500 EUR ($20,300 USD) per unit! -As is – Where is-

• Or can be fully refurbished before sale for approx. €19,000 EUR per unit

• Ideal for installation in Italy or any other country with high Feed In Tariffs for turbines up to 200kW

• Can ship anywhere in the world

NOW HEAVILY REDUCED – Priced to sell quick !!!!

• Only €155,000 EUR ($203,000 USD) for all 10 units!

• All in all, a staggering 2mW of rated output for as little as €155,000 EUR ($203,000 USD) -

• Turbines are already dismantled and can ship anywhere in the world

• Price is -As is – Where is-

Contact us immediately not to miss out!!!! These are sold on a first come – first served basis!

WindMaster Turbowind T200

• Model : T200
• Rated Output: 200kW (Acec generator – 50 hz -1514rmp – 380v)
• Tower Height:  24m – 2 sections
• Rotor diameter: 22m
• Year of build : 1990-1993
• Hansen gearbox
• Vickers hydraulic system
• Windmaster control panel
• Price : 19,500 Euro per unit – As Is – Where Is
• Number of units available: 10 + 1 for spare parts (with blades but without tower)
• Price for all 10 units is including 5 transformers – 2 wind turbines per transformer
• Minimum Order Qty: 5 turbines
• Current Location: Eastern Europe

Allready dismantled and ready to ship!

The wind turbines come complete for on-grid operation.

Please note that although these turbines had been in full operation until the date of dismantling but these are from between 1990 – 1993 and are in need of some refurbishing and overhaul work before they can be put back into operation!

Minimum sales quantity: 1 unit

Don’t miss this amazing offer!

This is a one time opportunity for any buyer to either up your existing wind farm by a massive 2MW or for the construction of a new wind farm project for a fraction (25%) of the price which a farm would cost if equipped with brand new turbines.

WindMaster Turbowind T200

Number of turbines: 10 available immediately

10 used WindMaster TurboWind T200 (50hz) wind turbines available now! Can ship anywhere in the world

• NOW HEAVILY REDUCED – Priced to sell quick !!!!

• Only €15,500 EUR ($20,300 USD) per unit! -As is – Where is-

• Or can be fully refurbished before sale for approx. €19,000 EUR per unit (plus transportation costs for nacelle and blades to refurbisher workshop)

• Ideal for installation in Italy or any other country with high Feed In Tariffs for turbines up to 200kW

• Can ship anywhere in the world

  
  

NOW HEAVILY REDUCED – Priced to sell quick !!!!

• Only €155,000 EUR ($203,000 USD) for all 10 units!

• All in all, a staggering 2mW of rated output for as little as €195,000 EUR ($280,000 USD) -

• Turbines are already dismantled and can ship anywhere in the world

• Price is -As is – Where is-

• Contact us immediately not to miss out!!!! These are sold on a first come – first served basis!

• Use the Contact Form next to the Google Map Tab at the top right hand corner of this page

NOTES:

• Buyer must collect
• Please do not request a shipping quote from us!

• The items listed in this advert are offered for sale by a private owner through MWPS.
• Neither MWPS nor the owner of these turbines provide shipping or transportation services
• Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
• However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below!

• Viewings at seller’s site can only be arranged if signed LOI (Letter of Intention) has been received

• Time wasters and tire kickers will not be accomodated!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

Get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports.

Get a shipping quote from uShip! For collection address reference, use the town of ‘Bucharest – Romania’

Click here to get quotes!

HOW DOES uSHIP WORK?

Disclaimers:

Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors

2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

RARE OPPORTUNITY!

ONLY €108,000 EUR per unit – Built in 1998 – 65m tower – 40m rotor diameter

Full Enercon Service history. Last full service March 2012

• 2 x Enercon E40 – 500 kW (50Hz) (Made in Germany) For Sale for only €108,000 EUR per unit – ‘ExWorks’ seller’s site
  

• Still in operation until 15th April 2012 – Can be viewed fully operating – Price excluding dismantling
  

• Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

• Full Enercon Service History available

• These turbines have been in operation in a very low wind speed area and very mild inland climate

• Only 8,800,000 kwH produced per turbine to date

• Buyer must dismantle. Seller can assist in arranging dismantling.
  

TECHNICAL SPECIFICATIONS:

• Turbine type: Enercon E40 (old shape nacelle)
  

• Built: 1998
• Nominal Output: 500 kW
• Rotor diameter: 40meter
• Tower Height: 65 meter (three sections)
  
• Number of turbines available: 2
  
• Total combined capacity: 1 MW
• First commissioning date: 1998

Sale price contains:

• Complete Turbine – Towers, Nacelle, Blades, Hub & Controller
• Full service history documentation
• Technical drawings for foundations including drawings for founation rings and frames etc.

These turbines are still in operation until 15th April 2012. Please note that these turbines had been operating in a very low wind speed area and in an inland mild climate area.

NOTE: These turbines are currently configured for 50Hz operation – conversion to 60Hz grid frequency is required for connection to 60Hz grids.

Perfect for investors from Eastern Europe, South America, Middle East, Far East, Africa or Asia

THESE TURBINES ARE PRICED TO SELL QUICK AND WILL NOT LAST LONG!

Please contact ad owner NOW for more details

NOTES:

• Price is without dismantling & shipping. Seller can assist with best dismantling and shipping offer.

• Please do not request a shipping quote from us!
  
  • The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
    
  • Neither MWPS nor the owner of these turbines provide shipping or transportation services
    
  • Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
  • However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below

• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!
• Purchase is subject to 7% sales commission at close of sale!

NEED A SHIPPING QUOTE FOR THIS TURBINE?

• Available turbines to source for you range from 1988 – 1993

• Prices range from €97,000 – € 115,000 EUR depending on date of manufacture

• Towers are 30m but 40m also available on request at extra cost
  

• Total prices range from €97k EUR to €115,k EUR per unit depending on age

• Terms: Buyer will log a purchase request with us and we will source a suitable turbine for you within 90 days – ExWorks owners site

• Note: On ocassions, turbines need to be purchased from seller in ‘as is’ condition and refurbishment is then undertaken by a 3rd party affiliate refurbisher. Additional transportation costs to workshop may apply
  

PERFORMANCE

The expected energy yields for the Vestas V27 at various annual wind speeds (AMWS) is shown below:

The annual electricity consumption of a medium size home is in the region of 4-6 MWh or 11-16 kWh per day. At 6 m/s wind speed the Vestas V27 can provide the average annual energy needs for 100 homes.

TECHNICAL SPECIFICATIONS:

Please note that original configuration is 50hz grid frequency and would need to be converted to operate on a 60hz grid at an additional cost

• Generator Rating 225 kW at 16 m/s
• Rotor Speed 43 rpm nominal
• Cut-in Wind Speed 3.5 m/s
• Survival wind speed 56 m/s
• Rotor diameter 27m
• Rotor orientation Upwind
• Number of blades 3
• Blade material Fibreglass/polyester
• Control system Pitch controlled
• Gearbox Planetary
• Brakes Disc
• Generator Asynchronous
• Yaw control Powered
• Tower height 30 m – 40m available on request at extra cost
  
• Tower Free standing

Reconditioning Schedule Wind Turbines

1.

a. Tower:

i. Tower is inspected and where necessary repairs will be made inside and outside tower;

1. Inspection of security lines and connections,

2. Inspection of outside steps, correct bended steps.

3. Inspection of tower connection box, add new main twist cable. Replace tower connection box where necessary.

b. Nacelle:

i. Chassis;

1. Physical inspection of chassis and bolt connections, remove oxidation where necessary.

2. Physical inspection of subchassis, apply new layer of primer and paint against corrosion.

3. Optical and Physical inspection of rubber mountings of subchassis for anti-vibrating system

4. Attach a new layer of paint on the hood of the nacelle if necessary

ii. Yawing system;

1. Physical and optical inspection of main cogwheel on wear, where necessary smoothed teeth to assure less wear during operation

2. Opening of complete main cogwheel for cleaning and inspection of bearing, clean and inject new grease, complete new separator for ball bearings installed including dust protection.

3. Complete overhaul of yawing gearbox, all bearings replace, flexible connection inspection and adjustment.

4. Inspection and new insulation (thermical injection under high pressure) add to the yawing engine

5. Fill with new gearbox oil as prescribed by manufacturer.

6. Inspect and check for proper operation of the cable twist system.

iii. Generator;

1. Complete overhauling of generator, new bearings, windings cleaning and insulation attached (thermical injection under high pressure)

2. Check for resistance of windings and check for proper operation

3. Flexible connection of generator inspect and renew.

4. Greased bearings as prescribed by manufacturer.

iv. Main gearbox;

1. Completely overhaul gearbox, place new bearings where necessary.

2. Optical and Physical check of all cogwheels on wear and where necessary corrected. Cogwheels and axes are mounted with specifications as prescribed by Manufacturer.

3. Main axle check for haircracks with use of Dye-spray.

4. Physical and optical check of gearbox brake system for correct operation.

5. Resistance of (oil filled) gearbox to be adjusted assuring a proper operation at low windspeeds.

6. Physical and optical check on ‘back-run’ brake system, 1 replace with new brake.

7. Fill with new Castrol gearbox oil as prescribed by Manufacturer.

8. All closing parts of gearbox to be smoothened to assure a leak free operation.

v. Rotor;

1. To be overhauled completely

a. 2 New main bearings to be placed at each blade axle

b. New teflon bearings placed at each centrifugal axle where necessary

c. Shock absorbers tested for proper operation

d. Springs adjusted to dimensions as specified by Manufacturer

e. Blade angle system to be completely adjusted to factory settings, blade angles to be adjusted to 6,7 degrees

f. All covers to be checked for leakage or holes

g. Rotor to be balanced as specified by manufacturer with blades attached and numbered (under clinical conditions)

h. Rotor to be physically tested for proper operation of blade angle system and blade angle brake system

Note: During first 500 hrs of operation final power adjustments need to be made to the rotor blade system (>12m/s max 80KW output) by adjusting the springs and/or blade angle system.

vi. Blades;

1. To be cleaned completely, repaired and repainted

a. Holes to be repaired where necessary

b. Optical inspection of complete outer surface

c. Attached an anti corrosion layer for protection with 2-component paint

d. Attach a wear protection at the ‘fly’ side of the blades

c. Control housing, chassis housing and connection points and instruments

i. Main control housing

1. Physical and optical inspection and prepare for ‘Full Variable Operation’

a. Cleaning for dust

b. All connection points to be checked and cleaned from any corrosion

c. All relays to be checked for proper operation and cleaned for oxidation

d. All fuses to be checked and replaced if necessary

e. All capacitors check for proper operation

f. All transformers to be inspected and checked for resistance and proper operation

g. Mutator to be checked for proper operation

i. Diodes to be checked and replaced where necessary and diodes to be replaced where necessary

ii. Thyristors to be checked

iii. Mutator print check

iv. Cooling system to be checked

h. Transducer to be checked and adjusted to 2V between 11-12 (0 KW zero point)

i. PLC to be inspected and check for proper operation

i. Latest software in Eeproms to be loaded if necessary.

ii. Chassis housing

1. Physical and optical inspection

a. To be cleaned for dust

b. All connection points to be checked and cleaned from any corrosion

c. PLC to be inspected and checked for proper operation

2. Instruments

a. Wind vane to be checked for proper operation, bearing to be replaced (needs final adjusting during installing the wind turbine)

b. Anemometer to be checked for proper operation

c. Imbalance switch to be checked for proper operation

d. Rotations sensor to be checked for proper operation

e. Cable twist system to be checked for proper operation

DOWNLOAD REFURBISHING SCHEDULE

Reconditioning Schedule Wind Turbines.pdf

Contact Ad owner for quick sale

10 discounted units of brand new General Electric GE Wind Turbines – GE 2.5S – 2.5mW Wind Turbines For Sale!

All units are excluding Towers

Great opportunity for the serious wind energy investor or Wind Farm developer who is looking for immediately available large industrial 2.5MW wind turbines.

10 units left of these brand new wind turbines of the magnificent GENERAL ELECTRIC GE 2.5MW immediately available

WATCH YOUR 30 MINUTES GUIDED TOUR

Build in 2008, these IEC Class IIa Wind Turbines had been shipped to Asia in 2008 and are currently in storage at the original destination port in Asia. All 10 left over units are still readily packaged and can be shipped world wide immediately. The turbines have never been in operation and all 10 units come without towers  -  Incoterm FOB – Japan Seaport – Please note that warranty has expired during storage and would need to be purchased seperatley from GE. Multiple different warranty packages available. Please see GE energy website.

As a reference, we had previous quotes for extended warranty for approx. 100 Euros per day per machine.

• Tower specs and drawings available to obtain quotes from 3rd party tower manufacturers
  

Picture for illustration only

POWER
Rated power 2,500 kW
Rated wind speed 12.0 m/s
Cut-in wind speed 3.5 m/s
Cut-out wind speed 25.0 m/s
ROTOR
Diameter 88 m
Number of blades 3
Rotor speed 14.1 rpm (rated power) rpm
Type LM 487
Material glas-fibre reinforced plastic

NACELLE
Design separated
GEAR BOX
Type combined spur / planetary gear
Stages 3
Ratio 1:117.4

GENERATOR
Type synchronous, permanent magnet
Number 1
Speed 1,650 rpm (rated speed) rpm
Voltage 690 V V
Grid connection via converter
Grid frequency  60 Hz

Please Note: Currently these turbines are set to operate on 60hz  grid frequency and need to be converted to 50hz  for countries operating on 50hz grid at buyers expense! These are IEC Class IIa turbines with 88m Rotor Diameter

DCONTROL AND PROTECTION SYSTEM
Power limitation pitch
Speed control variable via microprocessor
Main brake individual blade pitch control
Second brake system disk brake
Yaw control system 4 electric gear motor(s)

Note: Above technical data is subject to technical alterations, errors and omissions

Contact Ad owner for quick sale

Viewings can only be arranged if signed LOI (Letter of Intend) has been received.

NOTES:

• • The items listed in this advert are offered for sale by a private owner or wind farm operator through MWPS.
    
  • Neither MWPS nor the owner of these turbines provide shipping or transportation services
    
  • Unless a shipping service/offer is specifically listed in this advert, collection and transportation/shipping must be organized and paid for by the buyer.
  • However, both MWPS or the owner will endeavor to assist you in the best way to organize the Loading, and transportation or you can get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports using the service provided by uShip. See below!
  • 
    
• Viewings only if signed LOI (Letter of Intent) has been received.
• Time wasters and tire kickers will not be accommodated!

NEED A SHIPPING QUOTE FOR THESE TURBINES?

Get fast, free & competitive shipping quotes from world wide shipping companies specialized in international wind turbine transports.

Get a shipping quote from uShip! For collection address reference, use the town of  Leeds, UK.  Click here to get quotes!

HOW DOES uSHIP WORK?

Disclaimers: Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors 2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment

6. Please refer to our full terms & conditions. Click here!